Recent content by signbeth

And here Oracal is bragging about fancy new metallics! Give us the black and white!

Mike -Yes, a print spooler issue sounds feasible. It is a normal lpt printer cable. The same one I was using with windows 7 computer. When the new computer was built I had them add-in lpt port. I am not sure what you mean by a pcie card and dropping in rip server. Can you recommend a specific...

I was thinking the pausing was part of the issue as well, so have switched to 300x300 for printing spot colors. Doing that reduced the problem, but it is still doing the pausing which seems to be connected to that line. I understand what folks are saying about the Omega software, but I don't...

I am working in Flexi 19. I have just upgraded to a new windows 10 computer. Since upgrading computers, I am having the issue of random thin white vertical lines in my prints. The edge 2 machine is buffering more than usual as well. Can I get some advice on what to try to eliminate these white...

Signs 101 Network RegistryIn what country are you located? USA In what state or province are you located? TN In what city or town are you located? Murfreesboro What large city is nearest you? Nashville Check all items that apply to your listingInstallations (Vehicles) Local Networking...

Tried to print a .jpg today on the edge machine. All that printed was a light ghost of the image I needed. Flexi 7.6 would have printed it with no problems. Anyone out there with Flexi 10.5 printing on edge machine have any advice? Any new settings that I am unaware of? thanks

They are unchecked, it is only when colors come up in edge window that is starts out with process yellow.

Thanks for the suggestion Mike, but I have narrowed the problem down to the finish coat. When I tried to print without the finish coat, the spot color job printed as expected. I tried to use differant spot colors as the finish coat as a work around, but print still reverted to 4-color process...

After Using Flexi-sign pro 7.6 for years we have upgraded to Flexi 10.5. Most of my edge 2 printing is in spot colors. Been getting along fine before checking the box that says-print spot colors only in the driver options tab. Now, even though it shows on screen that I will be printing spot...

Poll size refers to being able to automatically import the available vinyl width (and length if desired) of vinyl into your production manager (after you have loaded your vinyl into the plotter) If your plotter is across the room or in another room, this feature could save you a lot of steps...

What about printing to the edge machine? Is Flexisign Pro 8 offer improvements for printing to the edge? Signbeth

The Flexi "Poll size" feature for the Graphtec quit working on me today. My computer station is on the other side of the room from the plotter and I rely on it quite a bit. Only thing that made today differant from other days is that I upgraded my QuickBooks. Could that have caused a...

Brian, Norton Tech told me worm protection was same as a firewall. Sorry if I used the wrong terminology. I had done a search on this topic previously and had not hit upon anything. Norton Tech had me go in worm protection section, then in program control and had me clear the existing...

It turns out Norton was keeping me from using the other production manager. Even though I had included the flexi application as an exception in the fire wall portion, since flexi was already in the exceptions from the previous set-up, Norton was confused. In a desparate mood I got online in a...