• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by signprinter

  1. Value jet 1304 no power

    Thank you very much!! It is fixed and printing. It must have been some dust on the memory the red fuse was fine. You saved me a lot of grief!! :)
  2. Value jet 1304 no power

    Thank you for the suggestions. I have the main board out as I was going to put in the one from my 1204 to test if the printer then turns on, but I will test the fuse first take out the memory card and then reinstall. Appreciate your help. Will post if that works.
  3. Value jet 1304 no power

    Turned on my printer today and nothing just clicks. Always unplug after use so no electric surges. I took picture of main board and these lights are staying on, on my 1204 they go off when starting No display so don't know error Checked fuses all fine Anyone know what these lights mean Thanks
  4. 300V cap problems

    Hello All I have had some problems in the past with my print head dropping colors. I replaced cap station tops, dampers, etc and have better results. Today I noticed that my cap station seems to be a little lopsided. I lowered the cap tops all the way down and then brought them back up as I...
  5. S

    Open for business

    Open for business
  6. Versa Camm Will Not Cut

    That fixed it...I ran as admin and is working great! Thank you
  7. Versa Camm Will Not Cut

    I also never had this problem with my desktop...it runs windows 8 could that be the problem. Roland said that this works on 10
  8. Versa Camm Will Not Cut

    I can cut a test cut from the printer. I also made a new media profile with the cut enabled and still not working
  9. Versa Camm Will Not Cut

    Hello All I just installed Versa Works on my laptop as my desktop was giving me problems. I have everything set up and it prints just fine, but it will not cut. I even tried sending the test cut from the menu and it says it is sent but will not cut. I have checked all settings and everywhere...
  10. GlassAdhere

    I know this is an older post, but I just requested a sample from the company and hope they send. You mentioned that it has a nice price point....my supplier (Fellers) sells this but it cost $309 for 100 ft....is this a good price or is there somewhere else that is less expensive. Thanks
  11. Need Help Versa Camm SP300V Help

    The caps are OEM so I will just start with that...but thank you for your help..hopefully I dont have to replace the pump.
  12. Need Help Versa Camm SP300V Help

    I just replaced the caps about 1 month ago....now over the weekend it sucked out all the ink from 4 brand new cartridges! I got the error to go away on Friday and printed...figured everything was ok...guess not :( But I have 2 more new caps so I put those in and then put cleaning cartridges in...
  13. Need Help Versa Camm SP300V Help

    Hey All... Came into work today and turned on my printer. It showed all my inks were empty...and they were, my waste tank was full too...that was the 1st thing Replaced all the inks and the printer went through it's start up, did a cleaning. The width came up as 0 and then it says internal...
  14. Wanted. Saw Trax

    Looking for a Saw Trax 64" preferably with all the different cutter options. Location in Illinois or close.. Thanks
  15. Help! Need T-shirts for my mom's benefit!!!

    We do screen printing...might be able to help you out. How many shirts are you needing? Can you PM a picture of the design..we might be able to fit it in. Cheryl
Top