• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by smilecth

  1. Need Help Repeat Line is shown up randomly.

    Hello. I am using Mimaki JV33-160A and Wasatch 7.6 Rip. I have a problem with repeat line shown up in printing. I would like to tell you with some example. Here is a pattern.(In addition, the pattern size could be changeable according to a pattern type.) And the media width is 1500mm. In...
  2. Suggestions [Bulk System] What's your ink bulk system?

    I am using Mimaki JV33 Series. I have changed the bulk system. I think the printing quality is better than before.
  3. Suggestions [Bulk System] What's your ink bulk system?

    Hello. I am using bulk system made in China. But I am not satisfied with that system. Although the inks are filled in the bulk tanks, there could be problem with pressure and bubbles. In my system, there's no floaters in cartridges so there are no way to control pressure and probably there...
  4. Nozzles are clogging but tech said there's no need to replace cap top

    I'm not a pro but I think there could be the tube line problem. If only magenta color had a problem, there could be a leak along the tube line from cartridge to head nozzle. At first, if I were you, I would check the tube line.
  5. Question [Cleaning & Ink Filling up] JV33-160A

    Hello, everyone! As using JV33-160A, there are many problems. The big issue was solved today with helpful advise of the member "Solventinkjet". And the other issue is the banding and color change. I printed on PET Film with aqueous pigment. But there are too many banding problems. After...
  6. Need Help [MIMAKI] JV33-160A INITIAL FILLINGUP ISSUE

    Thanks. You are the one of the best technician. The Problem has been solved.
  7. Need Help [MIMAKI] JV33-160A INITIAL FILLINGUP ISSUE

    This is the front of my CISS system. This is the backside of the CISS system and you can see how the hoses are connected. This is the damper station. The order of color is MCYKKYCM. This picture is the display when power is on. This is the ink set. This is selected display.( The mark "-"...
  8. jv33 bible.

    Oh. I think this could be helpful. But the link does not work. How can I do?
  9. Need Help [MIMAKI] JV33-160A INITIAL FILLINGUP ISSUE

    Hello. Nice to meet you everyone. I am using JV33-160A made by MIMAKI. There's one problem with initial ink filling-up. I am using CISS(MBIS) with 4 cartridges(CMYK). After first setup by the seller's engineer, there's no problem with using printer. The cartridges are installed at 1, 3, 5...
  10. S

    Hello.

    Hello.
  11. S

    None

    None
Top