Recent content by stickerman12

Vander, so far so good! The damper filled up about 1/4 of the way in the round part of the damper. i am printing now without any issues. Is this normal for it not to be filled up? Thanks

I have a Mimaki JV 33-160 and have ink leaking from the head. I am thinking the dampers need to be replaced. I have read all the posts I can find on the subject and it seems the best way to do this so you do not get air in the line without using a syringe is to go into the service mode and turn...

My emplyoee changed some settings on my cutter while I was on vacation and now my cutter will not read the registration marks. When it scans for the mark it is not looking in the right place for them. It scans in a small area and does not advance the vinyl forward while scanning. Any help out...

Thanks for the replys. I had already saw magnet king. Think I am going with them.

I am looking for 100 blank .030 5.75" - 6" round magnets. Can anyone recommend a supplier? Thanks

Thanks guys. I had one on hand but have never changed it. It was easy to do.:thankyou:

Lately my JV33 is loosing nozzles on a test print over the weekend and it takes an hour or 2 head soak to get them back. I'm thinking the capping station needs to be replaced but I do not know the procedure to do this. Can anyone help? -Thanks

When I get a customer that TELLS ME how he wants his sign made I always quiz him on how he plans on installing it.

We use alumaPanel.com

We get that on a weekly basis from large manufacturing plants. We usually set them up on a net 30 account which is customary for doing that type of work. We also do work for utility companies, the city, the county (including the schools0 and the state and do the same for them. It is necessary...

Premium Industries prints on the flat letter opener type but not the ones shaped like a toothbrush.

Anyone use 3M wrapping paper cutter? It is shaped almost like a toothbrush. It's good for cutting vinyl doing the hinge method install and Great around the laminator. The blade is hidden so you cannot cut your laminator roller. They are around $4. I found mine at Walmart.

I use a rubber bulb simular to what you use to suck water out of a childs ear.

When you get about 3" from rivet start using very light pressure until air is traped all the way around the rivet. Go back later and push air toward rivet until bubble is somewhat tight. punch hole and oush air out.