• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by stillhasdust

  1. Roland VS vs VSi

    I am going to buy a printer soon and I found a VS300 that I like. I noticed the ink cartridges are vertical but on the VSi they are horizontal. Is there any difference between the two models? I’m mainly worried about why they went from horizontal carts on all previous printers to vertical but...
  2. Roland VP300 spools material while printing

    Good idea!! I completely forgot about that disc.
  3. Roland VP300 spools material while printing

    During the print.
  4. Roland VP300 spools material while printing

    I have a VP300 and sometimes it likes to spool a bunch of material out while it is printing. It happens about once or twice per day. It is intermittent but the fact that I never know when it happens is the worst. I might be printing a 48" job and it will spool out a quarter of a roll while...
  5. Liquid Laminate

    @mikeD - I am actually looking for a spray on liquid laminate like frog juice. I should have been clearer.
  6. Liquid Laminate

    Does anybody have experience with printing, applying the liquid laminate, then contour cutting or perf cutting?
  7. Liquid Laminate

    Does anybody have any suggestions for a liquid laminate?
  8. roland sp540v carraige cable problems

    Make sure the linear encoder board is not crashing into the clear strips. The linear encoder board is held down by a screw but it swivels and can crash into the strips.
  9. Service Call 0121 - thermistor Why to buy?

    Contact your roland dealer. It is a very cheap part.
  10. T mobile poor customer service

    I worked for T-mobile customer service for a bit and if you tell them you are going overseas on military duty you can be relieved of your contract without providing proof of it. Once I got a call with that situation and the rules clearly stated to terminate their contract and remove the early...
  11. Roland Desktop Printer/Cutter

    I have seen them print and this is not a production machine. This is a machine intended for an "end user" that wants to make their own stickers, labels, and such. Or used as a second machine to add extra value with metallic. It is well built and has ROLAND quality all over it but not the machine...
  12. Fading in prints

    I have an SP-300 that has slight fading in the print. In the middle of the machine the ink is alot lighter than on the edges. It is not the file because it is one I have used for years. It is also not the vinyl because I tested it on another Roland machine. I have attached a picture please let...
  13. SP-300 draining ink

    I have an SP-300 that completely cleared my yellow and magenta cartridges in 1 week. I only printed roughly about 2 hours worth of stuff within the week. It was always left on and never any powerful cleanings. When I emptied the drain bottle it had a solid 3 inches of magenta sitting on the top...
  14. FJ-500 Yellow not firing

    I have a FJ-500 that prints every color other than yellow. I cap see yellow on the captop and I can also syringe yellow through the head but it will not print it. Does anybody have any idea of other answers?
  15. xc540 frustrating!

    Pull ink through the cap top using a syringe. Do you feel pressure?
Top