Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings thezigman has received

  1. ddarlak rated thezigman's post Like in the thread Problems installing flexisign 8.1.

    Defrag your hard drive. Run a registry cleaner then re install Flexi. Its an internal memory issue. Usually caused by fragmented hard...

    Aug 13, 2018
  2. James Burke rated thezigman's post Like in the thread True Confession.

    I'll just leave this here... [MEDIA]

    Jun 30, 2018
  3. GAC05 rated thezigman's post Like in the thread Suggestions Packaging/Shipping.

    Roll on an empty core.. use an empty box from Vinyl, or a mailing tube.

    Apr 2, 2018
  4. spooledUP7 rated thezigman's post Agree in the thread FC-8000 FC-8600 How to add Cross cut to Print/Cut Workflow??.

    you could set up a new condition, I use #8, set the force hard enough to cut all the way through. When you do the cutting, in production...

    Mar 18, 2018
  5. Terry01 rated thezigman's post Like in the thread where to find jagged check mark?.

    took about 10 seconds with Flexi's Bezier tool. [ATTACH]

    Mar 17, 2018
  6. printhog rated thezigman's post Agree in the thread What do I need to print on rtic stainless tumblers.

    depending on the complexity of the design, a pad printer may be the way to go.

    Nov 25, 2017
  7. ShoNuff rated thezigman's post Like in the thread Client Inquired about Custom Printed Kickballs.

    A pad printer would do the job

    Nov 6, 2017
  8. Pixels Are Bad Mmmkay? rated thezigman's post Like in the thread Signie 500 entry competition entry.

    should have made her a magnetic bikini!

    Sep 8, 2017
  9. michsanford rated thezigman's post Like in the thread Any ideas where I can get this?.

    call a local plastic supplier. They usually carry materials in larger sizes that regular sign supply places do not.

    Sep 8, 2017
  10. brycesteiner rated thezigman's post Like in the thread Perforated Window Vinyl viewed from the back.

    I'm pretty sure you will have to install it inside the case. Otherwise it would work the opposite way that you want.

    Sep 7, 2017
  11. Billct2 rated thezigman's post Like in the thread Perforated Window Vinyl viewed from the back.

    I'm pretty sure you will have to install it inside the case. Otherwise it would work the opposite way that you want.

    Sep 7, 2017
  12. 2B rated thezigman's post Agree in the thread Question printed wooden close pins.

    Pad printer

    Sep 6, 2017
  13. danboy777 rated thezigman's post Like in the thread Suggestions Channel for Coroplast to Slide Into.

    Most home improvement places sell extruded aluminum plywood cap, it comes in 1/4", 1/2" and 3/4". its basically just a small [ channel.

    Sep 5, 2017
  14. RayGun rated thezigman's post Like in the thread Suggestions Question Which is better: Many Small Runs or Long Run of Larger Decals?.

    In flexi you can choose different types of contour registration marks. Try using the Graphtec segment types. I think you'll have to...

    Sep 5, 2017
  15. custom sign center rated thezigman's post Like in the thread Need Help Mutoh 1204 media take up system part.

    I have a 1324. my measurements are nearly identical, but should add that the center bore is 32mm.

    Aug 25, 2017

 


Loading...