• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by timfse

  1. Roland Versacamm SP540V

    i spent $20K on my versacamm. sp 540V but that was with Flex=Sign Pro, too.
  2. Printing on clear vinyl

    Keep cuttin' vinyl.
  3. Removing vinyl from propane tank

    Thanks Thanks for the tips and ideas.
  4. Removing vinyl from propane tank

    The graphics are about 8' high, by 40' long. The tank itself is about 60' long. It has a digital print on Oracal 3165RA. Can't use heat...or flames. Any suggestions would be appreciated.
  5. Versacamm printing problem/question? Help!

    Mark, The profiles are updated automatically. Is this what you mean? Tim
  6. Versacamm printing problem/question? Help!

    sol pictures hi, not sure if I have these attachments or not. I was using roland esm calendered gloss Using ecomax inks Using profile in versaworks: GCVP: ESM Picture 3 has the flash on, but just to the right of the flash you can see the "streaks" I was talking about. Thanks, Tim
  7. Versacamm printing problem/question? Help!

    Thanks Barry. I just cleaned the machine as you outlined on your site. The only way I've got anything acceptable is to overprint(2). I must be missing something obvious. The machine is 6 months old, and I've never had any problem at all with the quality of the print. Thanks again for any...
  8. Versacamm printing problem/question? Help!

    I've been printing at high resolution, and tried overprint x2. I looks like the ink isn't drying (although to the touch it is). It definitely looks better on matte cal vinyl than the gloss... Our room temperature here is about 66. Could this be the problem? I did a "powerful" cleaning...
  9. Versacamm printing problem/question? Help!

    Well, i adjusted the calibration ok. It still looks like vertical stripes, random on the print. Almost like the material is not even. I don't know...
  10. Versacamm printing problem/question? Help!

    OK. I'll give that a try when this last one prints. I raised the resolution, and this one is "better", but still a light spot here or there. Nice website you have, too.
  11. Versacamm printing problem/question? Help!

    I was using a roland esm gloss calendered vinyl, with the profile installed. I just put some mattte calenedred vinyl in, changed the profile, and it looks better, but there are two or three light spots on the drawing. How do I adjust media feed calibration?
  12. Versacamm printing problem/question? Help!

    Hi, I'm attempting to print some blue "star of life" for an ambulance, but the print is really banding, and almost looks streaked. I printed some large "maltese crosses", red, and they came out beautiful. Can any body help? I've tried uni-directional, lowered the resolution, I'm relatively new...
Top