Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings Solventinkjet has received

  1. nicklas rated Solventinkjet's post Like in the thread Need Help SP540V get past cleaning.

    There is a little hole under the printer right below where the cap tops are. In that hole is a little flat metal rod that when turned...

    Aug 15, 2019
  2. Offsign rated Solventinkjet's post Like in the thread Mimaki RasterLink 6 - "QuickSets".

    In Rasterlink they are called "Favorites". If you click on the profile tab and then look up to the top left of that window there will be...

    Aug 15, 2019
  3. Bly rated Solventinkjet's post Like in the thread CJV300 Who has one?.

    Take the CJV150 and add a second print head. Now you have a CJV300. The quality will be the same and the speeds will be as fast or...

    Aug 12, 2019
  4. EmpressOfIcecream rated Solventinkjet's post Like in the thread Orange printed as Red on corriboard. Anyone know why and can it be salvaged?.

    The colors you chose are RGB and I bet your printer prints in the CMYK color space. Set your document color space to CMYK and find a...

    Aug 12, 2019
  5. nemesis2180 rated Solventinkjet's post Like in the thread Question VersaWorks - GX-24 + Mutoh 1624.

    Unfortunately Versaworks won't let you setup a printer from another brand. You could get Flexi or equivalent RIP that allows you to use...

    Aug 9, 2019
  6. FALCON rated Solventinkjet's post Like in the thread Advice About Head Dx4.

    As far as I know there are no differences. According to Roland, Mutoh and Mimaki the head rank isn't a serial number but a voltage...

    Aug 1, 2019
  7. FALCON rated Solventinkjet's post Like in the thread Advice About Head Dx4.

    All DX4 print heads are exactly the same. All current model heads are manufactured in Japan. The DX4 is old enough though that it might...

    Jul 31, 2019
  8. Saturn rated Solventinkjet's post Like in the thread Mutoh VJ-1624 can't get a clean nozzle check.

    Since the problem happens on both the 1624 and 1624x in the same colors, I would suspect bad ink. I looked up that part number and it...

    Jul 21, 2019
  9. premiercolour rated Solventinkjet's post Like in the thread Mutoh VJ-1624 can't get a clean nozzle check.

    Since the problem happens on both the 1624 and 1624x in the same colors, I would suspect bad ink. I looked up that part number and it...

    Jul 21, 2019
  10. BlueMoonATL rated Solventinkjet's post Like in the thread Need Help Suggestions Eco-sol printable that will stick to foam?.

    3640 has a water based adhesive which is good for cost but not as aggressive as a solvent based one. 3165 is a similar product with...

    Jul 20, 2019
  11. equippaint rated Solventinkjet's post Like in the thread New Product Mimaki or Epson.

    Just to clear some things up, Epson obviously has new tech because Epson developed the latest head technology and doesn't license it to...

    Jul 19, 2019
  12. Saturn rated Solventinkjet's post Like in the thread Need Help Versacamm SP-300 ... what the heck is this?.

    You have cross contamination. Usually it's caused by a clogged/partially clogged cap top or pump. The cap doesn't drain fast enough so...

    Jul 11, 2019
  13. CENTERVILLE SIGNS rated Solventinkjet's post Like in the thread Need Help Versacamm SP-300 ... what the heck is this?.

    You have cross contamination. Usually it's caused by a clogged/partially clogged cap top or pump. The cap doesn't drain fast enough so...

    Jul 10, 2019
  14. FALCON rated Solventinkjet's post Like in the thread PURCHASE CONSULTING.

    This is an important distinction. A printer/cutter usually cuts at about 20% of full speed and about 75% max pressure of a stand alone...

    Jul 9, 2019
  15. B13 Signs rated Solventinkjet's post Like in the thread Question gas-out solvent inks.

    It's another one of those sign industry things. Half the guys have never waited to laminate and say it's fine. The other half either...

    Jul 1, 2019
  16. Joe House rated Solventinkjet's post Like in the thread Need Help Software Help VersaWorks gradient changes from red/yellow to green/black???.

    I brought it into Illustrator and it looks like the way the gradient was made was a square gradient and then a circle clipping mask was...

    Jun 26, 2019
  17. muelli75 rated Solventinkjet's post Like in the thread How to adjust JV33 Capping Station?.

    You should never need to adjust your capping height on the JV33 and CJV30s. In my almost 10 years as a certified Mimaki tech, I have...

    Jun 22, 2019
  18. MP Custom rated Solventinkjet's post Like in the thread Ink Levels in Versaworks..

    The way the ink levels are read on a Roland is just a guess so you never know 100% how much is left. There is no sensor that reads the...

    Jun 14, 2019
  19. Saturn rated Solventinkjet's post Like in the thread Need Help Ordered new DX6 Did I get a fake or ?.

    There is no such thing as a DX6 print head. It was a modified DX5 for a specific small format printer but was never actually a new type...

    Jun 14, 2019
  20. sidcon rated Solventinkjet's post Like in the thread Need Help Ordered new DX6 Did I get a fake or ?.

    There is no such thing as a DX6 print head. It was a modified DX5 for a specific small format printer but was never actually a new type...

    Jun 14, 2019

 


Loading...