Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings VanderJ has received

  1. DerbyCitySignGuy rated VanderJ's post Informative in the thread Moving equipment in enclosed trailer.

    We do all of the above and also usually put 2 x 4s under the stand to lift the casters up off the floor. If you hit a good bump those...

    Nov 16, 2018 at 12:36 PM
  2. 2B rated VanderJ's post Informative in the thread What to do with equipment.

    A VJ628 is not some old machine that isn't worth anything. Not sure why people are telling you to junk it. I see people buy 20 year old...

    Nov 12, 2018
  3. flyplainsdrifta rated VanderJ's post Informative in the thread Need Help Question 3rd Party Inks (STS).

    I have run into this a bunch of times as a field tech. As soon as you put 3rd party ink in your machine, the manufacturer can decline to...

    Oct 24, 2018
  4. SignsSupport rated VanderJ's post Informative in the thread Where is the best place to purchase supplies for Roland printers?.

    Thanks for the mention! Just to be transparent, most of our Roland parts are non-OEM except for the print heads and some motors. If you...

    Oct 11, 2018
  5. jriley rated VanderJ's post Informative in the thread Mutoh Valuejet 1324 [kcmy] Broken Chip Error.

    If you have already put a cartridge in a machine and it was flagged as empty, it will always flag empty on every machine you put it in....

    Sep 28, 2018
  6. jriley rated VanderJ's post Informative in the thread Need Help Deciding what printer new printer to get.

    As Ron Swanson says, "Don't half *** 2 things. Whole *** 1 thing." For the things you want to do, there are printers that can do it, but...

    Sep 28, 2018
  7. jriley rated VanderJ's post Informative in the thread ONYX System Upgrade.

    Still a great machine especially for the 3D rendering! When a file is being RIPed the process relies on certain information processing...

    Sep 28, 2018
  8. jriley rated VanderJ's post Informative in the thread ONYX System Upgrade.

    If I am understanding correctly, things sped up but just not by as much as you thought it would? The speed boost probably came mostly...

    Sep 28, 2018
  9. SignsSupport rated VanderJ's post Informative in the thread Need Help PLOTTING ISSUE FLEXI AND MIMAKI.

    As long as the printer is powered on, the driver is installed and the USB is plugged in, the port should be USB_PRINTER_0. If you have...

    Sep 25, 2018
  10. DerbyCitySignGuy rated VanderJ's post Informative in the thread Rowmark Adhesive Failure?.

    Maybe you just got one from towards the end of the roll. We apply the adhesive in shop here and sometimes when we get towards the end of...

    Sep 17, 2018
  11. SignsSupport rated VanderJ's post Informative in the thread Mimaki Jv3 160s head issue.

    If you pushed cleaning solution through the yellow channel and it came out the cyan channel, the head is dead. The channels are...

    Aug 17, 2018
  12. Jburns rated VanderJ's post Informative in the thread Need Help Ordering a Mimaki JFK 200-2513, Good Move?.

    It's a good machine especially at the price point. I have a few customers who run them and they like them a lot. There is some...

    Aug 12, 2018
  13. Grafix rated VanderJ's post Informative in the thread Is my NEW print head USED ?.

    They test and then fill these heads with an aqueous solution. It is normal.

    Aug 3, 2018
  14. jsmoritz2000 rated VanderJ's post Informative in the thread Is my NEW print head USED ?.

    They test and then fill these heads with an aqueous solution. It is normal.

    Aug 3, 2018
  15. RG rated VanderJ's post Informative in the thread Applying Oralite 5600 onto calendared laminate?.

    You could do both but if you want to save some money and only spray lam it, that could work. I'm not too knowledgeable about if spray or...

    Jul 30, 2018
  16. RG rated VanderJ's post Informative in the thread Applying Oralite 5600 onto calendared laminate?.

    Sign Goddess has it right. I would just add if you wanted to protect the reflective and the print, you could spray laminate it as well.

    Jul 30, 2018
  17. Jburns rated VanderJ's post Informative in the thread mimaki cjv30 error 202 device construction and print head not firing at all.

    Here are some pictures of how a genuine Mimaki head comes packaged. This is one we had in stock and unopened. Outer box has sticker...

    Jul 29, 2018
  18. Andy D rated VanderJ's post Informative in the thread create an ICC profile via your design program.

    Think of it this way, your working space profile tells the RIP, "This is where I am coming from. My gamut is such and such and I am...

    Jul 12, 2018
  19. Andy D rated VanderJ's post Informative in the thread create an ICC profile via your design program.

    It does in a way. The working space profiles in your design program get embedded in the file when you save it except for EPS files and...

    Jul 12, 2018
  20. bigben rated VanderJ's post Informative in the thread Laminator Rolls were accidentally cut......recoat or repair??.

    I have resurfaced a laminator roller before. It's not that hard and only cost about $100. Call the manufacturer and have them send out a...

    Jun 28, 2018

 


Loading...