Recent content by Victorian Signs

Purchased A Mimaki JV-150/160 Printer & Need HELP PLEASE to find some SUBLIMATION ICC PROFILES, Not Vinyl ICC's.........have access to all of them, For This Printer Using Beaver Paper TexPrint-R Paper, Or Any Type Of Sublimation Paper...............All I seem to do is call Rep's & Get Nowhere I...

Hope someone can help me, I am looking for the .75" Solid PVC Multi Layer colored sheeting, it has (1) inner solid color, and (2) outer colors, when you route thru 1/8", your inner color is displayed, looking for a supplier..........thanks a million. :thankyou:

It's been a while since I have been on Signs 101, just built a new sign shop, 10,200 sq. ft and trying to get things organized, as part of the organization, I am trying to keep a better record of client digital printed files, down to the media, profiles, CMYK / RGB and sample...

Really need some help...............Have Gerber 5.0, setup works fine, prints to Gerber Edge 2, no problem, but will not export cut file to the Envision 375 cutter, will export test cut, will go over, show up as job,all is good, as far as settings, but job will not cut, tried to send another...

Anyone using, or knows of a good software out there that identifies type faces, something that gives you a couple options, all help is very much appreciated.......:thumb:

Looking to maybe convert my router controller over to LinuxCNC, does anyone have any input, good or bad.............thanks bob:thankyou:

New-Building-Construction Well folks, here is my interior layout, I do have about 3200 sq.ft of upper level storage, scirrors trusses, so walking is a breeze, will have (4) zones of radient floor heat, natural gas, 3-phase electric, and finally a nice showroom to display floor, wall, ceiling...

Well after 20 yrs in the sign business, I am living the dream, presently in the process of building a 60' x 170' sign studio, my office areas/showroom are 43' x 60', as always, I have valued any and all responds that come from the hard working folks @ signs101, I am looking for any ideas, or...

Has anyone had any experience in converting this system over, purchased a new CNC router, but there Syntec Controller is not working for us, and we want to convert to the user friendly Mach3 System, any help is so much appreciated. Thanks: Bob

Have a HP 9000 True Solvent Printer, and Matthews Paint System, both have very high levels of smell, does anyone have any idea what would be the best AIR PURIFIER SYSTEM that would work to eliminate these levels, as always, your comments are greatly appreicated...................:banghead:

change is tough, liked the old school, not to my liking

Does anyone have a source to purchase Roland XC-540 Epson Eco-Solvent PrintHeads, besides going thru the dealer chain, any help is as always, greatly appreciated................:thankyou:

The big test is, wait till you laminate your grays, see if they turn...........greenish tint color..........

I finished off the roll of 3M 8518, that I was having problems with, what a nightmare................decided to do a test on a 4' x 8' bad print, with Oracal 290 cast, paper backing.........laminate, ran it ................perfect, I THINK THE SLIPPERY MYLAR BACKING PAPER WAS CAUSING ME AN...

Uesd 3M 8518 (54") 2 Mil Laminate, Having Issues With The Slick Backing Paper on The Laminate, Can Anyone Recommend A High Performance Laminate, That Has A Good Paper Backing Many Thanks..........Bob:Welcome: