• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by WalkerP

  1. Laminate for UV Prints?

    Marabu Marashield UV-curable
  2. Anyone interested in an Oce 550XT? I need the floor space!

    Global Garage can help you unload it. Used Grand Format Printers and Other Used Print Equipment, Printhead Cleaning, New and Used Industrial Printer Parts, VUTEk parts
  3. CYAN all over my prints !

    Does the output color in those spaces read 0,0,0,0 in your RIP? Need to make sure it's not a data-in issue. Does it spit the cyan when you do a nozzle pattern test print?
  4. Oce Arizona Ink Supplier And/Or Alternative

    Brian, I just messaged you. Thanks and I look forward to hearing back.
  5. Anyone Have This Logo?

    Will AI not trace it well enough? If not, just use Vector Magic or similar.
  6. Need Help Roland Sp540v Smearing Cyan Everywhere

    Check your ribbon cables and connections for ink and/or scorching or poor seating. They could have been slightly dislodged in transportation and joggled loose with the printing/nozzle checks. Both going into head and control board. That's an easy troubleshoot to rule that out. Make sure printer...
  7. Roland Sp 300v M/y Print Head Not Printing?

    Take a meter and measure resistance to see if the fuse is truly bad. You can do that with the board still in. If so, just get a cheap axial fuse and solder across the old one. I too recommend taking the board out to do the soldering.
  8. Pinch roller is tracking red ink all over print

    Need more details and pics. Printer? Paper/vinyl? Ink type/brand? Etc.
  9. Anyone run aftermarket inks/chips in their HP FB?

    500, 700, etc. So those guys provide the chips too?
  10. Question Trying to decide on a UV Flatbed

    What are you wanting to print on? I have experience with both. You can PM me if you want specifics.
  11. RJ900 Sublimation Printer Clogged

    Can you pull ink from the dampers with a syringe?
  12. Anyone run aftermarket inks/chips in their HP FB?

    Curious as to what's out there and experiences with other inks and chip solutions.
  13. Mimaki UJF 3042FX

    I don't use a lot of jigs, but I get Digitalblanks when I do need one. Never had any issues with warping and we ship them to tradeshows, sampling at other sites, etc.
  14. SP540v Will not print red and yellow. Cant get the ink to flow to dampers

    "End of the line" meaning from the dampers or from the bottom of the capping station with the heads capped? Are you getting air or vacuum?
  15. UV Printing... With torches??

    Yes, i've used little butane torches. Works well.
Top