Recent content by WhiteWrapper

Tradewraps is out of Manassas.

Was looking to expand network of contract designers. Would like the option to have different designers for logos or signs to basic commercial and wild custom wraps. Is there a source of contract designer contacts and portfolios versus scouring through linkedin and the like? Thanks.

It's cake if you pop them out. Only problem is you have to take off the whole a side of the car to do so.

Guess Noone has had experience with the paint imperfections in the channels yet. I'll give my 15 sprinter tips: 1. Mirror plug behind window switch is clutch. 2. Tuck every channel and roll/relief cut deep channels. 3. Don't remove lower plastic trim. They have one use body clips. I...

Primer. Tack just a 6 inch piece at center leaving 5 inches to body line and a few inches above loose. Using heat gun roll (vcat or roller l) channel proper heat and speed. Relief cut and lam tape suggested and usually okay with educated customer. Post heat.

And unfortunatelyunfortunately now 3m certs are about as good as the paper its on.

For a pillar seams there will be something coming to split seams cleanly. Seamless wraps isn't a problem cutting on wide side. Single panels you would need to cut cleanly between the seam without this tool to wrap both edges. Fir other seams on single panel wraps you choose which side you can...

And good find mirror plugs are accessible through window switch panel.

Just had 2 more roll in Friday. You can visibly see paint drips in the inner channel. Customer refuses to relief cut. I highly suggest relief cutting and lamtaping 15 sprinters. Even with 480.

Using 180v3 with primer. Rolled with heat gun and both vcat amd roller L. Both look to conform well. I appears in spots it still leaves small, almost invisible bubble. Running the hard edge of a squeegee up the bare channel I feel a small bump where there may be an imperfection in body. I've had...

Thank you. I assume short of durability and hazards, blocking the wind and a heater had a marked improvement for you?

And fyi the a local business park/warehouse can be your friend for daily rates on vacant units. RV storage units can sometimes offer indoor spaces for the big guys on the daily.

I'm on the road lot and do on site installs. Unfortunately outdoors sometimes happens. Keep in mind this is NC. No wind Shade Fans pulling would cool it easy No rain My question was will a kerosene heater do anything in an enclosed canopy. I can handle ventilation. Just hoping...

I was thinking but getting a 10x20 enclosed tent for working outdoors. The insulation would be minimal, but hoping someone has tried this method with powerful fans in hot or in my current predicament, a kerosene heater. This wouldn't be for full commercial (print/lam). My hopes aren't high...

Nothing crazy. Have one for general removal 1080 One showing gold chrome fade in 2 year One for 1080 protecting paint (leaving a small dent) Search YouTube Erak Svetcov FYI : www.Facebook.com/mintwraps