• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by ZXNutt

  1. Efi H1625 Led

    Make sure you trim the boards to size. We often find that coro is never a true 48" wide. I usually print the first side and then trim the board to 48" wide before printing the second side, that keeps the alignment much closer.
  2. EFI H1625 Error 1272 Ink Tank Empty and Error 1279 K Ink Pump cannot supply ink - Help

    To add to the above, I swapped another ink pump for the black one, No change. I opened the secondary ink tank, let the float drop and the tank immediately began filling, signaling that both the pump and float are working fine, but still the same error codes. Im at a loss for what to try next.
  3. EFI H1625 Error 1272 Ink Tank Empty and Error 1279 K Ink Pump cannot supply ink - Help

    Hi All, I'm having an issue with our H1625 all of a sudden. It was printing fine this morning, I changed up materials and had some magenta drop out. I purged and tried to reprint, my vacuum dropped and I got ink streaks on the material (a common sign that one of the ink bottles are low). I...
  4. Need Help EFI H1625 LED water box temperature fluctuating

    Do you have any of those H1625 coolant pumps left? If not, do you have a part number by chance?
  5. toshiba Ca4w CE4W

    According to Digiprint Supplies, nothing. I ordered a CE4W1 for my EFI H1625 and they sent a CE4W in its place. I called them on it and they say its the same head. I have called the tech to schedule it to be installed (Black Channel), we shall see...
  6. Question UV Ink Curing in strange places in machine? EFI H1625

    They sent their tech out to change the cyan print head that I had on hand last month, at no cost to me, so I have hope that they will step up.
  7. Question UV Ink Curing in strange places in machine? EFI H1625

    This is exactly what we found to be our issue. We had been using Nazdar flush for the last 2-3 years (Same container - expires 2020). It worked just fine with the OEM inks. Initially, STS inks worked fine together with the flush until they changed the formulations a few months back. STS now has...
  8. Question UV Ink Curing in strange places in machine? EFI H1625

    I'm back with another issue I need help with. My H1625 has managed to cure ink 1) In the White secondary ink tank, 2) In the Black secondary ink tank and now 3) in the left side of the Cyan print head. I need some help to figure out why this is happening. Inks are all recent and have 6 months...
  9. EFI H1625 Ink Fading

    So the tech was useless and did not end up obtaining a more experienced tech. EFI had a suggestion that worked. I disconnected the cyan line from the secondary ink tank and removed it from the top of the torpedo filter. I ran the line into a clear plastic bottle inside the ink cabinet and back...
  10. EFI H1625 Ink Fading

    Not yet, Tech came last week and did some checking but did not find anything out of sorts. Ink track looks fine, vacuum is holding. He has requested a more experienced Tech and then we had a holiday and a hurricane.
  11. EFI H1625 Ink Fading

    It is inside the secondary ink tank on the carriage. EFI Sent it as an assembly - the secondary ink tank (silver tank), the sensor (Hangs from the top of the tank, but was pre-assembled), the electrical plug (goes into the center of the sensor), the 2 outlet tubes and 2 last chance filters.
  12. EFI H1625 Ink Fading

    The black sub tank & sensor was just replaced Friday. I was thinking the cyan pump as its outflow is lower than black. I researched further on EFI's community site. EFI's site says to check the bleeder line filter for clogging and that the bleeder line may need to be replaced. Where might that...
  13. EFI H1625 Ink Fading

    To add to the confusion or maybe help diagnose, I have noticed that black and cyan are not filling properly. I was purging when paused during a print (out the nozzle, using the silver button) and both cyan and black seemed to run all the way out of ink (Nothing more coming out the purge nozzle)...
  14. EFI H1625 Ink Fading

    For all other filters, it has been 6 months, but we typically only run half days 3-4 days per week. Cmyk is set at 3.1, white is set at 3.4. Cmyk reads 3.1-3.3 on the small screen above the heads and white reads 3.3-3.4.
  15. EFI H1625 Ink Fading

    I just wish I knew where. Cyan does not flow out of the front purge valve like black does...The stream is weaker/smaller. I disconnected before the pump and pulled ink through the intake (using a syringe). I then disconnected after the torpedo filter and pulled ink through (to make sure there...
Top