Separate names with a comma.
anybody heard about 5m width latex printer ?
There are some rumors on the market.
70 000 €
I’m looking for UV printer 320 cm wide (printing zone) with roll to roll system.
The most important things are:
High speed printing...
In my opinion everything is fine with head. Try to change head data cable (tape).
I checked in our jv33 and you must change parameter "41 model" to number 3 (this is jv33 130cm)
When you turn on the machine you need hold left and right buttons together to reach parameter menu. Look for parameter ''41 model'' and try change...
I think that you load too much ink for such small objects or the ink dot is to large for them.
Try to print with less ink density.
Try to exchange the cartridge valve in slot 6 (part number M013524).
If slot 5 is fine the problem must be there.
Zakup tej maszyny będzie najgorszą decyzją w twoim życiu. Mamy u siebie jedną i jak mam przy niej coś robić to mnie kur..ca bierze :P...
In service manual:
ERROR 49 CUTTER SOLENOID
An error occurred in cutter
Turn the power OFF and turn the
power ON after elapse of 2~3...
I use "KEMA GL-68" in the spray(500ml), it works great with our lx820 and it is cheap.
Help yourselves:Big Laugh
try changing the head data cable into a new one, if that doesn't work change head
first try cleaning the encoder (use alcohol :bushmill:) and encoder sensor (with air ) or replace them if they are in bad state, chack also head...
function-setup-select user-ink layers-select how many layers you need
How should the fine-adjustment look like? Like my third attachment - or should there a space between the lines (att3)?
You have to choose the...
Try cleaning the encoder, it can cause your problems. If it did not help check your head slan adjust ,you can find it in your service manual but...
You have to do head drop position calibration.
Go to service mode , after switching machine "on" hold down together Function and remote button.