Search results

You need to be a merchant member here to flog your own wares

Would something like this work? https://www.canadiandisplay.ca/Metal-Sign-Base-Holder-24-p/rsb24.htm

Our largest job was 11 continuous rolls, that was a busy week

The wholesaler we get our sandblasted cedar signs from just uses a high quality wood stain, he said clear coat will Crack and peel in a couple years outdoors. Any of the big paint companies like Ben Moore or sherwin Williams have exterior stain used for wood siding that is usually rated for...

The wholesaler we use always reccomends cedar over HDU for any application like this, he told me HDU is only good if the sign is completly supported like against a wall or something. A sign of this stature should have had a ladder frame welded up and sandwiched in the sign, even if it's single...

Would magnets work?

put an ad on craigslist for some PS5's at below market prices, he will get hundreds of calls an hour

Tell him to pound sand, what he did was completly 100% wrong, Putting an ad in the paper is a low move, I would tell him we are done now and he's lucky he doesn't hear from my lawyer. On the plus side, no one reads the paper anymore so you might just be fine.

https://www.rolanddga.com/products/media/paper/esmsgpa

Odd, what psi do you have your compressor set to if you don't mind me asking?

Does anyone know if there is a weight limit for sheets on the 1612? Ours works great, but i had a job recently routering a 5'x10' of 6mm ACM, it was a straight router job, no reg marks, and the piece cut about 0.5" too short, the issue started at the point where the sheet was advanced, all I...

I think there is a fairly well known issue with the roland printers where the take up isn't plum with the printer, which causes the material to wonder on the take up,which after a while causes head strikes

So the vacuum does shut down, just not fast enough? Have you updated anything recently? Firmware, software?

Wow, from a post looking for help to a political post in 5 posts, I wish I could say that was a record but I doubt it is. It must be boring having your entire personality revolve around 1 thing.

What type of things are you looking to have laser cut? We do our own in house but I might be able to reccomend someone, we are just outside toronto.

I would substitute for a product of similar quality, as long as you stand behind it if it fails I don't see an issue.

Was the estop pressed during the firmware update? If so that could cause a big issue like you described, if not contact summa about downgrading your firmware, it's not the first time they released a buggy firmware before testing it, we got one where our router wouldn't recognize, the firmware...

There are some paper stocks with adhesive backs, I know roland makes some, and a few others as well, not sure if the adhesive makes the paper non-recycleable or not. Nothing in this industry is environmentally friendly, even if you find some recyclable media, the release liner won't be...

I just bought this, thanks for the heads up!

I've noticed similar issues recently, where a vendor will tell you the item will ship by a certain date, but what they do is just create a shipping label, the package doesn't get picked up for a few days still, this allows them a few extra days before customers start calling to complain, so a 5...