Search results

Good luck with your dreams. Watercolor wallpaper is the new rage. Google it.

This use to be the best stuff until the FDA took it off the market

What is it you are trying to do, put things in vector back in Illy.

I install etch material all the time and found that Rapid Tac works the best and do not mind the price because I know it works, but I have made the homemade brew also. Teaspoon or Joy or Dawn mixed with a quart of water/ 1 capfull of baby shampoo with quart of water, add alcohol as needed for...

Making noise, let's hope he is on the good side, that noise and squealing sounds like a GerBot. Be careful.

Sounds like you have a good deal for someone who has always dreamed of starting their own business. You need to get an accountant to show good books and maybe you will have to train the new owners and show them the ropes for awhile as part of the deal. $75 k sounds reasonable for what you have...

I was curious and created a smart object in PS and then placed it in Illus. It has no paths, remains an image. Using CS6. Would be nice if you could be able to. Always work in Illus then bring into PS.

yes Oracal makes good banner tape.

I am starting to use CHA vinyl, goes done smooth without bubbles, can do a 4'x4' etch vinyl with 8 letters 3" tall cutout with transfer paper in record time installing dry, to separate us from the amateurs. The CHA stands for ChazHotAir release vinyl.

Have you thought about just opening your own shop, you are more than qualified.

I am not saying there is no climate change or it is not happening, but I drive a car, take plane rides, run a solvent printer and don't take my waste and mulch it either. Also realize that in a few years the seaway close to the North Pole will be opened for ships to pass through. I also buy...

No. As stated, Grimco.

Makita also sell a "V" cut blade for the track saw to make bends for boxes.

Irarasu went to the Al Gore movie on climate change so he is a believer. He got extra credit for going to see it.

As others have said, any woodworking tool such as a tablesaw, Skillsaw and jigsaw. I use a tracksaw that leaves a clean edge and is very accurate.

I think grapefruit rinds and coffee grounds is what the professor put in the car for fuel in the future.

Your my hero Chaz, so what is the right premask to use so I do not make that mistake again.

Never install using wet on glass, takes to long for it to set up so as to remove transfer material. Like stating before, only use wet (Rapidtac) when installing "etch" material in large pieces. And 20x faster using wet on glass than dry, You don't have to pick up the spray bottle, spray it on...

Yes. Air release. If I do get a bubble I tell the customer they are free.

Sorry to hear of a problem like that, but as others said, cast, and even go with a 1mil overlam like Oraguard 293 to give you more flexability on those numerous amount of bends and post heat.