Search results

Run far away from the Falcon no matter what deal you are getting. You are going to spend all of your time bashing your head and emptying your wallet to get that to run and it will always be a hassle to keep running. Also, the heads are discontinued for that machine and manufacturing of the head...

We are having a clearance sale of our Bordeaux 220mL cartridges for Roland printers. This price will be available while supplies last. You can't beat $99.95 for 4 cartridges and free shipping! Bordeaux For Roland 220mL Full CMYK Set

If you have never changed the maintenance station, I would recommend replacing the whole thing. It's too important of a part to let go bad. I have both just the cap top and whole maintenance station on my site: Solventinkjet.com

Looks like your maintenance station is failing. When was the last time you replaced the cap top and/or whole maintenance station?

If env match didn't work you will need to run the encoder setup and calibration in service mode. I have run into this problem before and that has always done the trick.

+1 It might be a bad router or other network hardware failing on you. We have an old junk laptop that we use to test trade in machines once in a while and it does the same thing when we use the RIP while printing setting. The computer just can't RIP fast enough to keep the printer printing so...

The PF adjustment can change from the beginning of a roll to the end. It's all about how old the motor is, how heavy the material is, and what condition the pinch rollers are in etc. You should even have different PF adjustments for each material you print on for the best accuracy. The fact that...

Have you run a PF adjustment? Even with a perfect encoder disc, the PF adjustment needs to be done to get the machine to feed the material properly.

FDC 4305 series comes in 54" x 10 yrds. Give me a call if your interested in a quote. I can drop ship anywhere in the US. 303-733-6671

Post a picture. It could be over spray from a printer issue or it could just need to be aligned. A picture will make it easier to tell.

I have two ideas: 1. When you set it back to factory defaults it may have reset the parameters that tell the machine which model it is. Tech support at Graphtec would know how to fix that better than me. 2. Check the gear on the right side of the machine that pushes the cutter back and forth...

How are you calculating ink consumption and why do you think it is more than it should be? The reason I ask is because if your machine is using way too much ink, it may be a printer problem rather than a profile issue. The difference between 540x720 and 360X540 is minuscule when it comes to ink...

Try this: With the machine in "menu mode"(menu light should be on) press next 4 times. (1 time to display the first menu and the 3 to get to the proper one) Now press F2. The first option under F2 should be display language. I'm not sure how to change the setting but I'm assuming there are...

Ink should be available as the JV3-250 is not being discontinued until a later date which is in 2016 I believe.

You could use the large dampers that the 1604 used but I can't think of why you would want to other than maybe price? The problem you will run into is the lines will be too short so you would have to lengthen them which causes way more of a headache than just getting the dampers it's supposed to...

New Service Mode Code: Down, Right, Left, Up, Right, Down, Left and then press the left, down and right buttons at the same time, hold and power on. Not sure why it's saying remove sheet when there is not one in there. Try putting the pinch rollers down and hit enter after that.

Check your settings in Flexi in the tab to the right of the profile tab called printer settings. Sometimes there will be a print feed adjustment in the profile itself. If it is enabled, it will override the printer's settings. You should be able to disable it and let the printer take care of the...

When you run the PF adjust make sure you enter what you measured and not try to compensate. The printer takes what you measured and compensates for you. Also, when you run the PF adjustment, it saves that setting under the Media Type you are on. You will have different PF adjustments for...

I've never seen a pattern like that. Judging by the fact that it happened all of a sudden and the regularity of the defect, I would lean more towards electronic issues on this one. Check your head cables for ink and debris that may be causing a short. Also look around the terminals where the...

Give us a call. We specialize in troubleshooting and helping you fix your printer over the phone. 303-733-6671