Search results

so do Roland pltrs.

What is "not alot of money?" $50K is not alot to some people.....

I worst thing I was thier biggest customer!!!!!!!

$500 a side (max metal and vinyl)

Paint the panel white, mask off the copy and paint the red. Then go back and paint the black outline on. No vinyl needed. Does this light up? If so back spray it, you will have to reverse the steps, and start with the black then red then white (painting the whole thing white for a filter. and...

$1.25 an hour? How can they pay their employees so much? I hope my guys don't get wind of this...

go to IMCA.com. We make the side ones 22" and the roof 30" the front and back 5 1/2" I think the rules say 24", but most bodies are 26" so 24" is too big.

I started using SignLab in 1992. I do not plan on upgrading again. $700-$800 every time is getting old, and there never seems to be that much difference in the versions. USB dongles do make it easier to operate on serval computers (I design stuff on or farm comp at night sometimes).

It should have a big Jesus fish on there somewhere....

Used a red reg to eradicate color off a cooley awning. It turned the white to pink and would not come out $500 mistake.

These were suposed to be dudes....

Soybean prices are still up and I have around 10,000 bl in storage. The shop is busy considering we lost our two constant customers. Well down to three of us until I drum up some new accounts.

Go to Roland's newly updated website www.Rolanddga.com, support (top right corner of site). Find your printer and use the utility to update the firmware. It's very simple and can be done in the user mode. To access the service mode to change page 12 of the system switch to "1", press the...

Export as a bmp of jpg. Simple

Our two biggest customers, about 65% of or business have both started doing their own printing. One acually sent a rep to our shop to see what materials we use and the equipment we had. At the time we thought she was just curious on how we printed their banners. Now It seems see was checking us...

You must do the firmware. Try it again.

We weld up our our post and panel stuff. Howard is good stuff, but we get the same look for about half the price. But we have our own welding shop and powder coater is down the street.

Roland, been using their stuff for 22 years. Only got screwed one time on a PNC 5000. Other than that I have had 7 other Roland machines that never gave me a any problems.

Remove the letters and put them on a background like MDO, HDU, Max-Metal. Anything dark colored. Don't paint the brick, that will look so home-made and unprofessional. The letters should come of, I bet the are just on there with studs glued into the brick. Pry them out. Sell them on a whole...

What is the best way to mount a 24" piece of vinyl? With an air gun?