Search results

I tried it in our Roland, also did not like the .020. Had to watch it like a hawk for tunneling/headstrikes and I found the print quality to be pretty poor.

ITC Officiana Serif ...either medium or bold weight I think. On my phone so it's hard to make a direct comparison.

On a semi-related note, 3M seems to have recently made the backing thinner, so the rolls are 10 lbs lighter and the roll appears smaller, though it's actually now 54 yards instead 50.

I'm not as familiar with print shops, but your yearly gross sales sounds a little low (roughly $325/day) as compared with the typical 1 man full time sign shop. Do you have time to sell more signs and run the equipment or would you have to hire help? That equipment is very capable in the right...

Looks decent, remember to watch your negative space & contrast. How come the tub was so high? Kinda seems floating a bit.

Are you sure it wasn't like that right out of the laminator? Sometimes the end of the rolls get kind of mottled looking. Also, If I have to roll any kind of digital print that has been masked, it has to be a really loose roll, like 18" diameter or you risk wrinkling/tunneling

I have solvent printed on GerberGlow. Came out alright. Colors will be off and heavy coverage bands a bit.

I would make an 11.5" square filled with a gradient 0% - 100% and run it through both horizontally and verticaly. Check to make sure the color transition is smooth with no dark areas of banding.

+1 this

Just got some Clean Cut blades in today for the first time. The're great! Even got them next day for only the cost if a flat rate priority mail envelope.

I replaced the lettering and stripes on this one for around $1200. No safety decals but it did include about 5 hours travel. (they did the removal) The view is nice when they send me up the mountains to do these cranes at windmill construction sites.

Yep, knowing Avery it's released right onto the shop floor. :toasting:

He was a great guy and I always looked forward to seeing what he had to say. What a terrible loss. Our condolences to his family, friends, and community.

Recommmend more airflow for drying. Somewhere there is a thread with directions on how to put together a couple of buckets & fans for airflow when space is limited. Also 75-80 install temp seems a little warm.

You might be new in town, but you want to conduct business in a manner that garners respect. Being kind of a pushover is not going to help land the good clients. Give good service, and back it up by charging for it. I would have offered to make adjustments to the design for a reasonable...

Outstanding! I hope they can get insurance to cover that, in case of accidents.

We are around $6/sq ft but yeah dont do it much...

Check files for transparencies, vw does not play well with them.

Yeah what they said. Does look custom as same characters are not exact matches.

Helvetica extra light might be close enough