Search results

No, steps are same. I am just test. It possible you have another localization I saw two version - Ameriacan and European with different password.

As I know nobody used diver for this printer - only RIP software. It is very easy to convert to Mutoh from special menu.

Also it possible the communication cable or fuses on inlet.

midmoco, I sent info in PM.

For check if cartridge detection sensor is working normally you can do: - Remove the cartridge and open locker frame; - Few times press to sensor's pin and check if printers's recognized it (pin on photo). Maybe pin is locked in some position and just need to release it. My printers are...

There is not so easy to explain. I just saw technician did it with my friend's printer. Please contact him if you want. Will send PM.

Why you want to convert? It is not a problem to comvert from Oce to Mutoh. Just need to reset company code in printer's memory. Special software should be used for it.

Procedure of unlock the printer will solve "Broken Chip" problem

The driver for VJ1304 does not exist. But it possible to print with driver for RJ900 or RJ1300. And the best way - use RIP software

Smartcards for 1304 and 1324 are completely different. I mean structure of data in card memory. It impossible to use cards from one printer to another.

RH II and Spitfire has a 1C1H (One Color One Head) color scheme on firmwares 3.xx and recognised by printer depend of card order. Yes, right - about red wires. But cards should be connected while power on the printer. If no contact - no initialize. Question was about stabile contacts for...

For my my 1614 and 1624 printers I am installed unlock codes and don't use smartcards anymore. But for I made some chip reader modification for my friend's Spitfire 65 Extreme printer. I've got generic card holder, disconnected wires from OEM card readers and catted connectors. Than soldered...

Based on my experience, ultrasonic cleaners destroy DX4, DX5 heads. Second issue - on your photo original pump system with step motors. You will need special controller for use this type motors. So, you choice not so easy way...

I am fill Nazdar ink in my 1614 and 1624 printer. And paid $300 to some guy for unlock.

More details please. What is printer model?

It possible InkEnd sensor damaged on some cartridgeholder. And this sensor is erased smartcard.

Originally it looks as on attached pictures. But in my opinion the construction of this cut sheet option is not good because: - cut knife is lose sharpness very quick and not cut the media completely; - same marzan is used for knife (even if another line); I think will be better to use manual...

This problem can be caused by poor contact on long flat cable connector. On mainboard or carriage board. Try to reconnect cables.

Menu Cleaning -> Initial Ink Charge will recharge ink lines

Best solution will be write new profile. For best result on 720x1080 resolution is use variable dot family (VSD3), Interlace pass 2, and Fine and Fog 3 wave.