Search results

When putting in a head rank on an Epson 9800 and a brand new head and using the correct numbers printed on the head rank tag. Thanks

I have a lot of these to take used parts off of so just PM me about what you need and I will try to help you out... Thank You, Richard

I have looked through both the manuals (Owners and Service) and can't seem to be able to find it. I know I am overlooking it somewhere (A brain Fart I guess) Can someone show me the light? Thank You, Richard

I got one of these in trade and it is in great condition except for the fact that it needs 6 new print heads due to the last owner not looking after them. So here is my question is this printer worth saving by buying 6 new heads or do I just part it out and move on. I need another Dye machine...

If anyone has one I would appreciate a copy I just got one and need to do a few things to it to get it up to par. Thanks in Advance, Richard

I need one ASAP. Where is the best place to get one? Thank You, Richard

I get these streaks at the end of every print, nowhere else just the end otherwise they look great. This is a Falcon II with 2X4 dye inks, and before someone suggests it it is not a head strike just streaks. It is about an inch wide and runs the length of the picture I am printing. It must be a...

I am using firmware 2.11 and I am not sure which way the carts go? Now I have them in this order KYCMMCYK I have another Falcon II running the same firmware that I just got in but it is not running at the present time and the carts are in this configuration KKCCMMYY It is printing great except...

I can't find this in the service manual for a FalconII. Any help would be appreciated . Thank You, Richard

I need some of these fuses that are pictured here only I need the ones that have a "50" on them. I need to know where to get them. I have found several different kinds but I am not sure of the amp rating or the voltage rating so if anyone can help I would appreciate it very much. Thank You, Richard

I am parting out a 64" Rockhopper II so if anyone needs any parts small or large just PM me and let me know what you need and I will give you a price, Richard

This is on a Falcon II and I have a new head in the box without the plastic tab that tells the head rank (It came with the used printer ) I have the serial number and all the numbers on the box but they are not enough numbers to set the rank. Is there another way, or am I screwed? Thank You...

I have just bought a 50 inch that was supposedly gone through by a Mutoh tech and everything seems ok with machine except when I went to do an ink fill (it was shipped drained) I found one of the heads unpluged with the cable ends taped up. So just to check the head, I took it out and ran...

The title is my question. Thank You, Richard

Ok, I just got this used Agfa Sherpa 64 (AKA FalconII) and I have replaced all 4 heads and flat head cables (heads were already out when I got it so I did not start it up until I got the new parts ) So now I get this error and cannot get past it. I was able to updated firmware but no change. In...

I need a pdf of the service manual for a Rockhopper II ASAP I have looked everywhere and can't come up with one. Thank You Ahead Of Time, Richard

How do you update the firmware. It says in the service manual you need a Flash memory card to put in this huge slot on the back what kind of card is it? I have tried an adapter like you use in a laptop and have inserted it in the slot with firmware on it and it does like it says in service...

I just got this used and I can't get past this error message. It boots up fine and then this message comes up and you cannot get any further. I have tried everything I know to try. Is there a way to reset this? Also how do you update the firmware. It says in the service manual you need a Flash...

I have 4 of these and I love the output and was wondering if anyone else has used one? Thank You, Richard

Could some give me step by step instructions for contour cutting with Flexi. Do you have to have a "CutContour" color like when using Corel or will it just see the contour path? All help will be appreciated. Thank You, Richard