I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Purchased new in 2014- for 2 years has had issues printing large areas of solid colors-
creates random white streaks.looks like a static issue but it is not. print test looks good- I will upload asap
Roland has sent techs ( at no charge) to try to fix and has new encoders/ dampers and many...
I had similar issue once - believe it or not it was the rubber on the wheel of the pinch roller on the far right.
I needed to replace the wheel. It’s worth taking a look. I watched as it cut and that’s the only way I noticed it.
I have a clients van Nissan 2017 NV200 was in an accident out there side and rear needs to be replaced. I will send all printed and cut graphics and instructions. Could be done at body shop or brought to your place. Body shop will pay bill when completed. est body work completed Dec 4-10 Please...
Had a similar issue a while back. It was the rubber on the pinch roller came loose. Drove me crazy for a day until I found it! Was the one on the right. FYI they are angled if you get a new one to change it.
The tech was here and it "looks like" its could be the encoder- so waiting on it to come in... down over a week arghhh! I haven't used the take up in months because it would band- hopefully this will do the trick and I can print AND use the take up reel... thanks for all the help everyone!
I'll have the encoder checked along with all the various other things it could be!
My help from last time seems to think I still may have some static issues especially with 3m material. I will send them pics of the set up tomorrow and see if they have any other advise. I'm ready to pull my hair...
I have heard the heads are bad in them- Warranty is up!- I don't want to buy a new one but if I have to China sounds better! I dont think I ever had a head crash not really sure what that is but never had anything bad happen as far as I know. I can print better on uni directional but if I try...
Thanks Joe
I did a lot of cleaning and I got to work with a different Media if I use unidirectional so must be a calibration setting I hope. Even with that I can't use the take up reel or it makes big white streaks in the prints! Still waiting for a tech to get in touch. I have wasted so much...
im so at my wits end! Last time I had the techs out 5x they replaced all the dampers and said it was the print head ( which I did not replace)
Someone here said static so I got bands and humidifiers and it was fixed with the exception of being able to use the take up reel ( which is a major...
Hi
I had a similar problem a while back. After opening up the printer I realized one of the inks was leaking. One of the tiny clamps that connect the tubes underneath had broken. It was getting ink but not consistently and colors were all off Small chance it could be the same issue but thought...
I had similar issues last fall. Looked just like yours! I had the techs out so many times, lost a job Replcaed dampers and almost the heads! I tied everything! Someone (my savior) from this board contacted me and told me what the issue was! It was static!! I bought a humidifier and static bands...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.