Search results

Expanding and high energy full service signage and marketing services company seeking experienced and energetic full time Field Installer and Production Tech. The candidate we are seeking should have experience in signage installation ** or ** rough carpentry, vinyl application, finishing...

Roland or HP I have run a Mimaki in the past and currently run two Rolands, one with print and cut option. We just brought in the new HP latex printer. I LOVE the new HP. The 220 is not a big deal. We had to have it installed before for the big Roland. The speed and quality are totally...

Try reinstalling cutting plug-in I have a Graphtec FC7500. I put it away for awhile and when I hooked it up again I had similar issues. I think I uninstalled, then reinstalled the cutting software and it worked.

It may be short...it happens. But you may also want to measure out your banners to be sure it isn't a calibration error. We have been asked that before when a roll came up short. Thats quite a bit short for a calibration error, but they will ask.

Fb910 We went through a similar experience about 18 months ago, but then we upgraded to the FB910 before the new 950 came out. We were initially impressed, but have issues with poor support and not being able to get consumable parts (we haven't been able to purchase lamps from HP for the...

We use them all the time. We use ours all the time on nearly everything we put through. I think they work great - especially when you can print through a 50 yd roll without even realigning it. It saves a lot on headstrikes, misprints, and spoilage. I just ordered a couple more to replace...

Empty cartridge? I don't know the particulars of that Roland, but we have a Roland SC-545 and sometimes the chip inside the cartridge that tells the printer the cartridge is empty gets dislodged and the printer will keep printing even without ink firing through that line. We can tell by doing...

Set-up the auto align and base point Hello and welcome. We have a Roland SC545-EX. I don't know if it is exactly the same, but on ours you have to line up the first crop mark using the auto align feature. There should be a section in your owners manual on setting up a print and cut. Then when...

Search Wikipedia Try searching on wikipedia for "one hundred dollar bill" it comes up with a front and back side image that is about 96" long - only 72 dpi, but it prints and looks great.

I liked it I worked with Seiko 64 for a few months. It was a nice printer. Used a lot for vehicle wraps, digital vinyl and banners. Never broke down on us and a good workhorse. But we did have to vent it through an air purifier.

Hello everybody. We currently have a Colorspan 5465 and are going to be moving up (more like moving on - done flogging a dead horse) to a larger flatbed. As things play out, we are left with the decision of upgrading to a brand new HP Scitex FB910 (Colorspan 9840) or the possibility of a used...

An HP tech came last week and re-certified our colorspan. He replaced some tubes and other things to make it more reliable. Also, the techs the week before leveled out our input and output tables and our 48 x 96 x 1/4" scooterboard has now been feeding great. We've been very happy with our...

Colorspan feedback They finished replacing the ink pumps and vacuum and leveled the input and out put tables. the techs and colorspan rep said the rollers on the tables and the grit rollers should all be level. We printed one 4x8x1/4" scooterboard and it came out ok. We are running some 36" x...

Techs are here now Thanks for the feedback. The service tech's are here now replacing the ink pumps and vacuum which also failed. I'll try and get some info from them and post anything new later. I'm lovin' it!:unclesam:

Hey there. We recently purchased the Colorspan 5465 flatbed and are having a lot of trouble successfully printing on anything over 1/4" thick. We have tried... lining the back of the substrate to get more traction. cleaning the grit/pinch rollers printing at slower/less quality speeds. printing...