• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Summa Dc5 W/ Gerber Ribbon - Want Kx Green

    There is some problems with overlaps and we havent totally figured it out, so we just re print at the moment as we dont got the time to dig deep into it. and as mentioned there is no support. Other than the Green and the lack of a good Yamaha blue. Its pretty nice. But it definetly drives one...
  2. Summa DC5 just in. No support

    i have never in my life heard of that printer! Must be a thing in the US. but by the look of google, its out of production
  3. Summa DC5 just in. No support

    Sounds right. thanks :) i´ll get my collegue to send you an mail on it. He was the one using the Gerber, i pretty much hated it from day one lol. It might be a few days, we are really busy atm.
  4. Summa DC5 just in. No support

    Exactly. Its incridible that a company as Summa has such bad support. The first company in Denmark that deals summa that we asked about it had no idea it existed and the guys we bought it from had never tried it out before. if we would buy it again... Yes, because once you run out of patience...
  5. Summa DC5 just in. No support

    There are two versions of the DC5. The DC5 that runs 8 colors at a time and the DC5sx that runs 5 i think. and the Ribbon size is the exact same. I think the supploer has something wrong, because there is nothing on Summa site about another machine. I think he might have mesured the ribbbons...
  6. Summa DC5 just in. No support

    The Edge is great for whites on clear vinyl. Its in genreal a works horse if it runs good. We also have a Roland VS540i that we use for the majority. the white on the roland we just gave up on early on as we had the gerber and the metallic pretty much totally dies when we use the thick MX...
  7. Summa DC5 just in. No support

    the machine should be ideal for what we both do, but its just so extremely time consuming to set it up just right. The spot orange and spots in general is really good. We pretty much only print og one specific vinyl and then the clear counterpart to that vinyl and run the same profile. as i...
  8. Summa DC5 just in. No support

    Hi SilkGRFX We are having some pretty irritating problems with the lines every 97mm. We cant seem to get it going great consistantly. But the stuff it actually does print prefect looks great. Theres a few other really crappy stuff. for example there is no green that matches a Kawasaki green and...
  9. Summa Dc5 W/ Gerber Ribbon - Want Kx Green

    The color is called Green II and i think it was formerly called Lime green.
  10. Summa Dc5 W/ Gerber Ribbon - Want Kx Green

    Hi people We got a huge issue with our new Summa DC5. It dosent seem to be able to print a Kawasaki green... Unlike our old Gerber Edge, this thing cant hit anything near a kawasaki green. Does anyone know something that we dont? Now we are thinking about experimenting with Gerber ribbons...
  11. Summa DC5 just in. No support

    Hope someone out there got experience. We got it running. But we cant find the optimal settings. We have trouble with some lines in the print. cant figure out if its density settings or what it is. because its not a overlap issue with the ribbons. does anyone have an idea or tip?
  12. Gerber Edge 2 - white line i colorprints

    We will try disable the foil conservation, but we will only use it for a few more days before we pack it up and put it on ebay :) the issue is pretty much only on the chrome, metallic foils and we have tried changeing casette.
  13. Summa DC5 just in. No support

    FrankW: They have zero experience with DC series printers. unfortunately. i´m installing the palettes from your link as i write this, thanks :) ProColor: Good question.. We only recently found out the machine excisted and we have been looking for an faster alternative for the Gerber edge. The...
  14. Summa DC5 just in. No support

    Hi everybody We just got our Summa DC5 and will start setting it up next week. The problem is, that here in Denmark there has only been sold 1 of these before and theres no technical support for these because they dont have any experience. And the other company who has one does not want to be...
  15. Gerber Edge 2 - white line i colorprints

    Thanks for all your answers. I really do appreciate you taking the time. We have now ordered a Summa DC5 and we will install it from next week. As we have no technical support on it. it should be interesting to see how long it will take us to figure it out. We couldnt justify fixing the gerber...
  16. Gerber Edge 2 - white line i colorprints

    Thanks for all of your responses. Browner, what do you mean by "Print head Data Cable"? we have ruled out the Vinyl and foil ribbons as the problem so far
  17. Gerber Edge 2 - white line i colorprints

    we´ve tried that already unfortunately. Its like it stops once in a while to buffer, and then it resumes, just for a very short while. and whenever that happens it makes a line. I have no idea why it stop to think/buffer!
  18. Gerber Edge 2 - white line i colorprints

    Hello Gerber owners We got a Gerber Edge 2 running and it make these really annoying white lines pretty much on every single print. Its random if its only a few or more but it ruins some of the print each time. Its not one specific color og ribbon. has any of you guys tried this?
  19. Corel X8s AI and EPS wont work!!

    i have tried both saving and exporting eps, ai and PFD from cs 3-6 and tried opening them in cs 5 and cs 6. i´ll try the extended support when i have a hole in my schedule
  20. Corel X8s AI and EPS wont work!!

    i tried that about 3-4 times already :) I have given up. Corel wants to do support on the computer, where they take over the desktop, but i cant take a day out of the schedule for them to mess around doing nothing, probably.
Top