• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Die-Cast Race Car Replicas

    Sorry asphalt late model.
  2. Die-Cast Race Car Replicas

    Hello, I'm looking for a blank die-cast late model race car. I've started with painting an existing model but looking for ways to speed up production. I have about 10 different race car designs to replicate as die-cast. I'm hoping to order in quality of 5, 10, or 25. Thanks for any...
  3. CJV30-130 Banding Issues

    I run a cjv30-100 and i don't seem to have banding issues but anything i print under 8 passes looks horrible. I turned it up to 16 pass with 720 x 1440 gpvc profile running es3 ink. Also I mostly printing on 3m 7725-10 @ 82 95 105F. My biggest issue is cutting. anything over 3ft seems to be...
  4. Mimaki cjv30-160 print and cut problem!!!

    Are you just having this issue on black on blue? TO me it sounds like your cut1 or which ever you are using the marks haven't been calibrated correctly. Setup > Mark Detect > Offset Y and Offset X
  5. mustang graphic

    you could do that but the black that they would print would match the car when it was new so either way the black more then likely wont match.
  6. Printing on diamond plate vinyl?

    I haven't tried diamond plate but chrome will take the ink but you can't cut it because the mark detect can't tell the difference between black and shiny. But if you get it to work let me know.
  7. Anyone using Eleven Ten Color Inks?

    Printer: Mimaki JV3-130 Rip Software: Wasatch We were running oem ink and did switch over with the inks and he did the side by side comparison and it was the same. About 3 months after switching we get a call from a customer wanting a reprint of an old order. I referenced my notes used the...
  8. Mimaki CJV30-100 Vinyl

    Hello, Printer / Plotter: Mimaki CJV30-100. Printer Max Printable Width: 40.1" Printer Max Media Width: 40.5" Logo: Printed and Die-cut Logo: Size 40" Vinyl hoping to use: 3m Controltac Does anyone know any vinyl that comes 40" or is this size of a printer jsut a mistake to produce?
  9. Thoughts on a Mimaki CVJ30-130

    Personally I prefer the Jv3-130 much better. Print and cut in one machine is really only good if your not going to over laminate. Over the year i have developed a system for getting the vinyl loaded back in the plotter just right but with the cjv3-100 you just can't move the cut head wherever...
  10. What solvent printable banner do you prefer???

    It depends on what your doing.
  11. Dealing with vendors/warranty issues

    Just like what people always say about army recruiters Get it in writing. My boss bought our mimaki before i started working here and i had no idea what i was doing harrased the hell out of tech to get this thing to do what was shown. i have finally started to see some colors. But my biggest...
  12. Film is Off

    So were using a gerber edge 2. when we print usally on white but does happen much to often for my liking the film will be off a milimeter or 2 and it shows the white horribly bad any suggestions? doesn't always happen to all the film, no not using just gerber film we use zeronine as well. gerber...
  13. Window Vision Issues...

    I have a mamaki jv3 sp2 I'm printing on 3m's window vision. As it's coming off the printer i check my work make sure colors look good and everything and what do i see a line straight through my work of no ink. This line is in alllll of my window vision just in one single spot as if something is...
  14. Mimaki cleaning kit question

    thanks GB2 great cleaning solution not made by mamaki but in my mind works just as well for what like 2x the price of a kit but i get a gallon of this solution. this is the liter http://www.abetterink.com/pages/cleaning%20solution%20JV3%20shortprice.html but if you call them they sell the gallon...
  15. How is this Laminator Seal 62 Ultra C, Any one using it?

    well personally i hope you change your mind... we couldn't work a day with out it. transfer tape laminate print jobs it is a good work horse. you need to learn to use it you just can't jump into and run. takes us 2 people to operate on big jobs and one person on small jobs (up to 30 inch for...
  16. Mimaki jv3 SPII Colors

    This is a question posed by others but it seems to get off the topic quickly so here goes again. I have read that 6 color wont really add to your color selection but what i really want is to intensify my colors like cyan and yellow and green. Is 6 color worth changing from a dual cmyk setup or...
  17. Omega 2.51 vs Design Station

    i have a suspicion that since you don't have a printer that he didn't install the printer aspect of it which i think you are liking. i will have to do some looking around at work but i think its just the spot color pallet your missing.
  18. Where do you "Mimakian's" get your inks?

    Grimco or Midwest Sign
  19. Corvette font/logo?

    a font type that is close is called Bitsumishi the only problem with the font is that the m doesn't match. hope this helps you out.
Top