• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Roland SP-300v black ink streaks

    Don't lay the roll of vinyl directly on the rollers on the back. Use the media core flanges. Sent from my Moto Z (2) using Tapatalk

  3. Ink cartridge errors on XR-640

    The I/C holder needs replacing. Just pay attention to what color does it Sent from my Moto Z (2) using Tapatalk
  4.

    LEJ-640 FT UV Flatbed problems. Ending my silence

    The UV4 inks clear this up Sent from my Moto Z (2) using Tapatalk

  5. Need Help Roland TruVis VG-540 Print / Cut Issues with FlexiSign & Print (Version 12)

    That send to VersaWorks button doesn't work with the new VersaWorks dual. Flexi needs to fix that. All they need to do is export the file as an eps, or use the RVW virtual driver and print to VersaWorks right from Flexi. Sent from my Moto Z (2) using Tapatalk

  6. SP-300v failed to open port when pushing firmware

    Before you send firmware, you have to initialize the board. It's in the service manual Sent from my Moto Z (2) using Tapatalk

  7. Roland BN-20 and versa works

    If your copy of VW is older, it may not support the BN20. Go to the start menu,find the Roland VersaWorks folder and perform online update. Also, being a USB printer, make sure no other USB printers are connected when you try to verify in VW Sent from my Moto Z (2) using Tapatalk

  8. Need Help finding the ip on a SP-540V, also setting up in flexi

    Google print server net tool. Download the software and run it with the Roland connected to the network. It finds it via the Mac address and allows you to change the IP address Sent from my Moto Z (2) using Tapatalk

  9. Need Help finding the ip on a SP-540V, also setting up in flexi

    With Windows 7 and up, all you need is a patch cord to print using a static IP address directly from the PC. Sent from my Moto Z (2) using Tapatalk

  10. Pinchroll Error - Lower Pinchroll

    Turn off soft power. Hold down menu and turn soft power on. Set your preferences. Sent from my Moto Z (2) using Tapatalk

  11. VP-540 Loses Power in VersaWorks when sending job from RIP to Print

    Unplug the printer and look for any cables not seated all the way. Also,look for any broken sensors. I had an SC545EX that randomly shut off on my customer, and I found a cracked sheet set sensor. They are protected from short circuits. Sent from my Moto Z (2) using Tapatalk

  12. Need Help Roland xr 640 not printing cyan

    Run a choke clean Sent from my Moto Z (2) using Tapatalk

  13. Roland VS series damper replacement help

    Use an Allen wrenches to close the choke valves, and then you can replace the dampers. Sent from my Moto Z (2) using Tapatalk

  14. Roland VS series damper replacement help

    On the VS, the chole valve is just a metal clamp that squeezes the ink lines. Doubt it went bad. Sent from my Moto Z (2) using Tapatalk

  15. Ink configuration

    Not true. The white ink printer has a recirculating ink pump system for the white channels. Whole different printer Sent from my Moto Z (2) using Tapatalk
  16.

    Question XR640 dropout - possible head?

    How old are the cap tops? Need replacement every 6-12 months Sent from my Moto Z (2) using Tapatalk

  17. Need Help SP-300 and USB in Windows 10

    The SP300V is NOT compatible with VW Dual. Sent from my Moto Z (2) using Tapatalk

  18. SP 540V heads not moving?

    Servo board. I bet the ic chip for the scan motor blew. When you remove the back cover, you will either have parts of the chip fall out, or you will notice a cracked ic chip. It's near the bottom of the servo board. Sent from my Moto Z (2) using Tapatalk

  19. Roland RF-640 banding left side of machine

    Anybody check head calibrations? What about belt tension? Sent from my Moto Z (2) using Tapatalk

  20. Just stops printing and states Not Connected in VersaWorks

    This problem is the Achilles heel of the VP. You can Google Mac Media. They can repair the board for$200 Sent from my Moto Z (2) using Tapatalk

  21. Eco Sol Max Black Ink Scratching

    Greetings Francis, it's Melvin. I'll be calling you soon about the flourescent dye sub inks. Sent from my Moto Z (2) using Tapatalk
Top