• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help S30670 erorr 1F80

    hello Friend, your problem claims to be the IC Holder, maybe ink was spilled on the small card that carries the IC Holder, if so you must replace IC Holder, I hope this information helps you
  2. Epson F6070 Printhead replacement

    Service Program You need the service program, great care with this printhead It is delicate
  3. Epson GS6000

    Test the Fuses if you say that if you eject ink, your problem can be mainboard fuses with a tester checks that are not open
  4. Epson GS6000

    may be dampers I recommend you change dampers and maintenance station, the dampers should be changed every six months and the station every 12 months to charge ink from the panel.
  5. 1624 - Service Manual Needed

    James, I need Mutoh Vj1624 service manual, please Hi James, can you send me the mutoh vj1624 maintenance manual, my email is colorcastleecuador@hotmail.com
  6. No Power Mutoh Falcon RJ-6000a

    Hi Ripper1 Here you can buy, are very reliable, you also need to buy PCMCIA to load firmware on mainboard ( I have 1 PCMCIA flash card with firmware) http://www.digiprint-supplies.com/rockhopper-i-main-board-de-36365.html
  7. No Power Mutoh Falcon RJ-6000a

    Hello, if you say that there is voltage problem, I would try changing the Power supply, and if that's not the problem then exchange the mainboard, I sell one power supply, if you are interested write me, if not ease my mail, maybe not permitted by the laws of the forum,
  8. Espartaco1967

    Mutoh RJ900 Problem just print sizes of 60 cms Hi all, I recently...

    Mutoh RJ900 Problem just print sizes of 60 cms Hi all, I recently bought a mainboard for my Mutoh RJ900C (108 cms), the printer starts, initializes, including prints very well, the problem is that only prints on paper of 60 cm, if I install a roll of 100 cms, the...
  9. Mutoh RJ900 Problem just print sizes of 60 cms

    To Rubo Hello Thanks for your help, I have a PC, I send to print from Illustrator, I create an image (a rectangle of 106 cms horizontally by 10 cm high) I choose 108 cms size paper, the printer processes the file, start printing , but the carrier only advances 60 cms (printing the image), but...
  10. Mutoh RJ900 Problem just print sizes of 60 cms

    Hi all, I recently bought a mainboard for my Mutoh RJ900C (108 cms), the printer starts, initializes, including prints very well, the problem is that only prints on paper of 60 cm, if I install a roll of 100 cms, the machine trying to detect the size, but the car just reaches the center of the...
  11. Mutoh Experts...Please HELP

    System Faults When Message is Displayed 1 • E075 Error Sensor Fault This message indicates that condition has occurred in which the origin cannot be detected. 1-1 1-2 1-3 1-4 1-5 • Use the self-diagnostic “Sensor: Origin” and carry out the origin sensor test. • Check the origin sensor assembly...
  12. No Power Mutoh Falcon RJ-6000a

    Hi your problem is in the Mainboard, you need to change mainboard, me and this happened to me, and I had to change mainboard, feel more
  13. Looking for Help Falcon 2 "Head Overcharged" 075 code...

    Hi, I have many parts for Falcon outdoor Jr38 and Falcon II, CR Board, Head riboon cables, etc, I can to sent to USA, my email colorcastleecuador@hotmail.com
  14. mutoh printer part

    in belgica is www.digiprint-supplies.com, they have your piece
  15. Mutoh Falcon II error message....

    My email colorcastleecuador@hotmail.com
  16. Mutoh Falcon II error message....

    E 072 Error CR OverCurrent An overload occurred in the CR motor (Y-axis) during operation. (6) The Mainboard assembly may have a problem. → Error E068 occurs if Mainboard assembly connector J155/COVER-R or J156/COVER-L is not connected. • Replace the Mainboard assembly. • Make sure that the...
  17. Mutoh falcon II 87" cap station

    My email is colorcastleecuador@hotmail.com
  18. Reset home position

    Hi My friends I have a Problem with RJ-6100 ( undefined paper ), I think is Parameters values, SomeBody Have a maintenance Manual for RJ_6100 43 or Sherpa 43i, my email is colorcastleecuador@hotmail.com,
  19. Espartaco1967

    thanks

    thanks
  20. Espartaco1967

    Hola Victor, acaso tu trabajabas en CMYKParts, soy Orly de Ecuador

    Hola Victor, acaso tu trabajabas en CMYKParts, soy Orly de Ecuador
Top