• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help Print issue on Mutoh 1324

    Any idea what is causing this? On a Mutoh eco-sol printer. Happening on a few different media's but always in the same place, and mostly showing up on darker colors. Have cleaned the encoder strip and pinch rollers with lint free cloth and alcohol. Only seems to be happening in that area.
  2. Question Making mounting template for Acrylic sign with studs

    So... curious about the best way to make a mounting template for an acrylic (metal, etc as well) sign that will be mounted with studs. Studs are mounted in various spots on the back of the signage with pads... best way to create the wall mount template for drilling the needed holes, etc in the...
  3. Question Best source for standard cut vinyl graphics?

    We're just a bit too busy... have about 800 cut vinyl graphics that we need to get done. Curious who you recommend to get these done? Need 4 different colors, roughly 200 each, at roughly 8"x2.5" with application tape
  4. Need Help Sherwin Williams ProMar 200 Zero VOC Interior Latex paint - no stick!

    So... have run into issues with other no VOC paints, but this stuff has just sucked. Virtually everything I've tested on a wall painted with this stuff starts to lift or fall off. Any one find a material or method that actually sticks and stays up (wall mural, etc)?
  5. Rant Sherwin Williams ProMar 200 Zero VOC Interior Latex paint - no stick!

    So... have run into issues with other no VOC paints, but this stuff has just sucked. Virtually everything I've tested on a wall painted with this stuff starts to lift or fall off. Any one find a material or method that actually sticks and stays up (wall mural, etc)?
  6. Need Help Permit specs for new brick facade on concrete foundation?

    I have a customer building a new building and they want 2 non-lit signs done, both brick facade on concrete foundation. We've done signs on these structures before, which was easy to permit,etc. But they want us to do the permit request and have the structures built, etc as "the sign...
  7. OLD wrap removal

    Okay... so we all know that heat and steam only get so far on old/bad wraps. And erasers can take forever and can get costly too. What other methods have been used out there, to prep the car for another wrap (versus just removing the wrap and hoping the paint is ok)? Orbital sanding? Sand...
  8. Recommendations - 4x8 sign, 10' in the air, and movable?

    Okay... so I have a real estate customer who wants a 4' tall x 8' wide sign, with the top up at 10' off the ground. Either a inexpensive recommendation to mount the sign as requested, or a better option that would be reusable and movable to other property when done at the current property. Any...
  9. Source for these type of frames, etc.

    Looking for someone that does this type of frame. Custom extruded wording with braille? And a slide in section for replaceable artwork
  10. New Shop Printable Vinyl Storage, Cabinet, Etc.

    So... been wanting to clean up the shop a little bit and get the printable vinyl more organized. Had built horizontal hanging storage a while back, but only for 36" and narrower rolls (window perf, etc). Finally designed a built a test version of this earlier in the year... use it for our...
  11. Font ID help

    Thanks... ;)
  12. Projection/Wall mount signs

    We have a customer that wants some of their sign's displayed via wall projection. As an example, 5" tall by 48" long -- 5" against the wall, 48" coming "out of the wall" into the hallway. For items this size, what solutions have you used or would you recommend?
  13. Commercial Window Front - Perf

    Looking for experience and opinions here. Have a customer who wants us to do quite a bit of window perf on outdoor windows for a long term application (longer the better, 3+ years ideally). Need mostly 36" rolls, and probably one roll at least 40" or wider. What material do you recommend, and...
  14. Formed sign face supplier (D/FW Area?)

    Looking for a formed sign face supplier.... for this particular job, I really only need a blank face for a backlit sign.
  15. Mutoh VJ-1304 -- HELP!

    Currently have a down printer and need some help! If you have experience with the dampers and the maintenance station I'd appreciate contact to help me resolve the issues! Bad timing too, as I'm going out of town for a few days early next week. Thanks to those available....
  16. Nozzle Check issue / Printing

    So... yesterday I was having issues with our first print job with cyan. Tried doing some cyan printing to flush it out, but just got worse. Ended up soaking the head in cleaning solution for about 45 minutes, then printed some CMYK panels to flush it, and got it working properly. Printed...
  17. Clear acrylic - easily scratched?

    So.... back to the acrylic vs polycarbonate debate :rolleyes: We are doing a project with print/cut art on glass and mounted in a frame. Looking for a most cost effective and safer shipping method, and considering using acrylic instead of glass. My concern is the ease of scratching, etc...
  18. Ink Smart Cards for VJ-1304?

    Used to be able to buy the ink cartridge smart cards in various places... now that I need some, I can't seem to find them for a decent price. Any recommendations? Can be the 220ml or 440ml cards.
  19. Source for custom die-cut business cards?

    Anyone have a good source? These particular ones are standard sized (rectangular) on 14 or 16pt paper. The need a custom punch through on the inside of the card (basically inside the logo). Thanks
  20. Font identification please

    Anyone know the Faux Pas font?
Top