• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help Using a vj1204 mainboard in a vj1614

    Hi All, I need some urgent advice, i run a vj1614 which has suddenly died, i am sure the mainboard has died, caused by a power spike, I have a vj1204 which we no longer use but i think the mainboard is in good condition, Is it possible to take the vj1204 mainboard and upgrade the firmware to...
  2. CJV 30-130 Magenta Nozzle Issue

    Hi all, I am having an issue with my cjv30-130, one of the magenta nozzles is not firing, the machine was idle for a few weeks and when we powered it up we could not get one of the magenta nozzles to fire, tried everything, cleaning, soaking, pulling through with a syringe. Finally decided...
  3. RE: Firmware for cjv30

    Hi All, I urgently require firmware vr 2.0 for mimaki cjv30-130, i had a board problem and on replacing the board the new firmware does not recognize the print head. Thanks, G.D
  4. VJ1614 Network Port Not Working

    Hi All, Got a major issue, we just replaced the printhead on our vj1614 and now all of a sudden the machine does not communicate with the printer server, our old server crashed so we bought a new one, at first i thought it was a networking issue, but now after trying all kinds of...
  5. VJ 1614 Firmware

    Hi All, I urgently require firmware for my vj1614, we have been using third party inks for some time now, however my operator recently updated the firmware to 2.0 and now the machine shows "broken chip" on some of the colours, but some of the chips still work. I want to downgrade the firmware...
  6. RE: Print Calibration

    Hi guys i need help on how to calibrate my vj 1614, i have attached a pic of what the problem is, normally i would have looked up my service manual and sorted it out but last month my laptop got stolen along will all my data :-( Long story made short i need to recalibrate the machine and...
  7. REL Lines across the print

    Hi Guys, Another day another issue, after solving all my problems with the pf encoder CR2 error i finally have managed to get the machine up and running, now i have a problem where the machine is printing black lines across the prints as seen in the picture attached, anyone know why this is...
  8. Err067 PF ENCODER ERROR

    Hi All, Need some urgent help, my vj 1614 suddenly started giving me first a PF Motor Error which has now developed to Err 067 PF Encoder error, i substituted the encoder on my vj 1204 and placed it in the 1614 but the error still persists, i also changed the PF Motor to a spare one i had. Any...
  9. 1204 Head Fuse keeps blowing

    Hi Guys, I have a very confusing problem here, my vj1204 magenta ink line that goes to the damper had a slight leak, once i changed that line the head fuse on the main board blew, now every time i change the fuse and power up the machine the fuse keeps blowing, what could be causing this, Need...
  10. 1204 Menu in Japanese

    Hi Guys, We just installed a new motherboard on our Mutoh 1204 and updated the firmware but now the menu is in japanese, How do we change it to english, Thanks, G.D
  11. New 1204 Motherboard

    Hi Guys I have just replaced the motherboard on my 1204, but now the LCD is blank and the post heater gets extemly hot within seconds of turning the machine on. Anyone be able to help with this, I am literally at wits end. Thanks, G.D
  12. cpu error 35

    Hi guys, I have a serious problem (when is it ever not serious) my vj 1204 wont boot up it just keeps flashing CPU ERROR 35, is there anything i can do to salvage the main board as i assume that is what is gone, or can i isolate a fuse that might be blown, any help will be much appreciated...
  13. Cjv30-130

    Hi guys I have a serious problem. My mimaki cjv30-130 the head recently struck the metal material holding guide and after that all the colours except the magenta stopped firing, now after several days of head soaking and cleaning nothing is firing, give me some hope guys is the head gone or not...
  14. RE: Tech Ink Profile

    Hi Guys, I recently switched to techink on my vj1204, the problem i am having is that the prints are coming out dull and lack vibrance, can anyone advise where i can get the icc profiles for the ink, i am using onyx rip 7 Thanks G.D
  15. cjv30-130

    Hi guys we recently bought a new cjv30-130 and are just getting to grips with using it, my question is whats the maximum thickness this machine can cut as in can it cut banner and others stuff or does it only cut vinyl, also can it cut through and through or does it only do kiss cutting:thankyou:
  16. VJ 1204 Not printing at all

    Hi Guys, i have a huge problem, My VJ1204 is not printing at all, nothing is coming out of the head, i have read thru all the posts here and basically, the dampers are fine and the capping station is also sucking properly. I did the suggested trick of sucking from the pipes under the...
  17. Mutoh 1204 PF Motor Error

    Hi Guys, i have a valuejet 1204, we recently replaced the PF Motor on it, my problem is after a particularly long job, 100,000 bumper stickers i keep getting a E071 Err PF Current Error, can anyone help me in resolving this, also where can i get the maintainance manual for the same machine...
Top