• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Custom printed Microfiber Cloths

    Does anyone know who may print on Microfiber cloth? The request was for double sided and approx 22" x 22" and about 200 qty. Thanks for any input.
  2. Media Flange Guides

    I use those flanges and they are a must with heavier rolls of media. I would buy again if needed. Well worth it.
  3. SC-500 won't take my software Color Choice II

    It's Color Choice that works with that printer not Color Choice II. (I guess I was wrong, it just needs the dongle. Thanks for the post below correcting that info) The version that was last out was Color Choice 4.5 and it does not need a dongle and was a free download from Roland at one time...
  4. Clear printable vinyl for windows

    I have oracal 3620 removable clear laminate and it will print nice with eco sol inks but it is not a clear view through it. It will have a blurred look. Kind of like putting anything other than an optically clear laminate over window perf, nothing else will give a clear view. I also have an...
  5. Temporary Window Signage

    The wet install is not hard. You just mist the window and set the cling in place and then squeegee out the bit of water. It's actually easier to do it wet then to smooth it out dry. But there are some customers who just can't do simple things....
  6. Temporary Window Signage

    I've used clear cling that was approx 12" by 60" wide that I did a double strike print of black lettering reverse printed so that the ink was not against the window. They had a white roller blind that they pulled down a foot so that the black showed on the window. The install was done wet so...
  7. Illustrator question

    If they are grouped then when you click on that small circle shape (with black pointer) it will grab all but if you use the white pointer (selection tool) you can grab areas that are grouped and just select them. However they will still be grouped together once you click off that selection. I...
  8. Best way to cut lots of small coroplast pieces.

    I would look at a band saw option if you have one. To cut 3000 down now to that 36" length you could make a small jig to stack 10 to 20 pieces or however high your band saw will let you cut. So basically a jig that lets you line up the stack and slide through using the guide slot in the table...
  9. Screen Printing Problems? What do you think?

    I had a thread here a couple years back about the same issue with the first set of coro signs I had gotten from 4over flatbed printed. They seemed to scratch easily and the 2nd order that showed up a bit later that week with full print on the coro were worse and I did end up laminating them to...
  10. Latex Canvas that works with water based pigmented ink?

    Now that one you listed is shown as solvent and seeing that Latex will bond to a lot more media, I can see why that would work for you. I do have some solvent canvas from Amplis ( way too much money for how it turned out) and with that there is no way the water based will stick to it. This is...
  11. Latex Canvas that works with water based pigmented ink?

    Here is an interesting one on canvas. I was able to do a small test print on a scrap of canvas that was meant to be for latex printers. It looked to have a rolled on coating on the canvas and you could see where it stopped by the faint lines on the edges. The area that was not coated was the...
  12. Ice Rink Graphics

    Yes the smaller hole mesh would show a bit better but the stuff I used was just standard mesh from 4 over. I re printed one AD on my own, with standard mesh, and my color was a bit better being double printed but not a huge difference once in the ice. The thickness of the ice on top of the...
  13. Ice Rink Graphics

    I have just used mesh banner material. It allows the water to squeeze out of the holes and stays flat when rolling out and it is like window perf where you don't notice the holes from a few feet away. Print the mesh with a double print if you can to make it more bold. After they build the ice...
  14. Yellow starts dropping out after a foot of printing: VS-640

    If you want to test things to find out what the issue is before changing out parts an easy way is to just swap the damper on the yellow with the color beside it. Once you swap dampers do a cleaning and then your test print and if the yellow head still drops out after a bit of printing with the...
  15. Business cards

    You can get 5000 from 4 over for close to that price plus shipping and taxes. Now that they have a branch in Toronto that is my go to option for flyers and such.
  16. Having small Lines 'Ghost' Under print

    Missing nozzles won't do that but deflecting ones can. Your test print looks good but there are a couple defecting in magenta. One would think if it were deflecting only in Magenta then the lines would not be the exact same color as your print but more pink like the Magenta is. It does not...
  17. Using currency in a design layout or coupon.

    Hmmm not sure why. I just used the insert image button. Any others not see an attachment? Used the paper clip to upload this one.
  18. Using currency in a design layout or coupon.

    Here is what I came up with. Hope they like it. Just fixed the missing R in other.
  19. Using currency in a design layout or coupon.

    And I am quite sure that is how they did their batch from the other printing place. I have seen kids play money but a lot smaller in size, made to look like a real bill but with specimen across them. Also single sided. I assume they went through the process of getting approval...... and made...
  20. Using currency in a design layout or coupon.

    That's the kind of link I was looking for with regards to our Canadian Currency. Thanks. Funny thing is that he had already had some printed by another printing company (not sure who) and thus wondered why I told him I could not do that..... or at least I was quite sure I couldn't. Just...
Top