• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. News Océ Arizona Tips #4. - 350XT Vac Zone Extend

    Hi Guys, Maybe somebody have 350 XT and interested in extend the vacuum zones. This is helps you to separate the RIGHT half of the full table. If you like to print to thick matterials (above 2mm), just close the valve, and not need masking so mutch on the table surface. We printing a lot of...
  2. Ultra High Resolution Images

    Hi Folks, Maybe somebody could help me to get very-very high resolution images to test my printers HD mode. High detailed photos would be the best. Around 300 PPI resolution, at size of 98 inches (width). So, at least 100 megapixel photos or other good stuffs would be highly appreciated...
  3. News Océ Arizona Tips #3. - RMO trolley

    Hey Guys, I have a good solution, if you have the following issues with handling your rolls on RMO.: - need 2 people to change a heavy or long roll, but only you are the one who works. :) - need to put the rolls (with bar) into other table to change the rolls on RMO bars. (sometime on to the...
  4. News Océ Arizona Tips #2. - Cloning HDD

    Hi Guys, (First, sorry for my grammar. Im not talented in languages..) Somebody asked me, Have I got any solution for extend the original inks expiring time. I remember that time, when I also got this problem with original inks. Sometimes when I buy this very expensive ink bags, it dispalys...
  5. News Océ Arizona 350 LED

    Hi Guys, I would like to show you our Arizona 350 XT LED based curing system. (because some of you interesed, and would like to see :)) Advantages: - Very Low energy consumption (Arizona eats only 3.2A total (on 230V) under printing on max power, (exclude vacuum pumps) - more than 10K hours...
  6. News Océ Arizona Tips: Shorted Nozzle check print

    Hi Folks, We are usually printing to narrow rolls. Therefore, our Arizona machines always wanted to use narrow-nozzle-check prints. As you know, these prints have double size, and wasting a lot of matterial... :( Other case is: the machine printing into the RMO bed directly, what is not a good...
  7. Need Help EOT / POT for ZÜND PN?

    Hi Folks, Unfortunatelly somebody take away some of our Zünd tools. :( So, I just would like to ask you, have you any idea where can I buy used ones? I need EOT-3 and/or POT (1.5mm) tools. Any solution would be interest for me. THank you for your help, Greg
  8. Question GTK Cut 2.05 for Zünd PN. Any experience?

    Hi All, Have someone experience in the Grafitroniks Cut (aka. GTK CUT) software? We just get an used PN series ZÜND machine (with this software), but we havent any knowledge in the software. Of course, I dont want it free of charge. Thanks in advance, GregK
  9. Need Help Zünd XL2500cv (PN series) Camera Software need

    Hi Folks, I just bought an used Zünd XL 2500 machine with conveyor (2.5m long conveyor). Unfortunatelly lost the hardware key for the installed GTK Cut 2.05 (Grafiktronics) cutting software. It was paired with an Oce Arizona 550, so the Onyx Thrive was the RIP/CUT workflow manager. I asked...
  10. Arizona 4xx service manual

    Hi folks, Im searching for Oce Arizona 480 XT service manual. I would like to disassemble - move - assemble the machine. Maybe somebody could help me? I have the service manual for 350 and 550, but 480 is a bit different, I think... I think the install process would be different... So, If...
  11. Hi from Hungary!

    Hi there, I just would like to say hello for everyone! We are from Hungary, EU. Our company is a small, custom manufacturing company. If you like, you can check us in here: www.dekornet.hu On graphics side, we have two OcE arizona 350 XT, vinyl cutter and laser macines... Have a nice day, Greg
Top