Search results

Hello everyone, Want to know what resolution acrylics are printed on. We use 600x900 12-pass but sometimes get banding, Especially in the blues. I do have about 5 missing cyan nozzles that I replaced with the Nozzle Replacement feature. Should I be using 24 pass?

Hello My Epson S60600L runs on a bulk in system. Most of the time it makes me change the ink bag there is still ink inside. There must be a good 200ml + left in them. Called Epson they upgraded my firmware but it did not help. Anyone having similar issues with this type of printer?

Hello all, My flatbed says my primer is empty. The bottle is half full. The bottle expired yesterday 6/2/21. My supplier has no ink until next week and Mimaki has no explanation. Got a new, but expired bottle (2019) but does not work either. Says expired. I know a while back I was shown...

We print acrylics using a 600x900 Rasterlink acrylic profile. At the default value of 12 passes the colors print great. When we add a white background I have to change to 24 pass or my white has thin banding. Which is very noticeable especially when printing light colors such as a sky. Now...

Hello everyone. Trying to print a 2 inch thick acrylic on our Mimaki JFX200 2513. We lowered the head gap to 1.5 but printer still wont accept it. pressing enter after it reads the media height wont work. Im afraid to go any lower and risk a head crash.

Using a Graphtec FC9000 with Onyx Thrive. We print a bunch of print and cut decals. When it comes to placing on the graphtec to cut, it cuts all the decals fine except for the last row on the side of the media. It only cuts half the image. We have tested with smaller jobs to make sure we...

Our Epson S60600" suddenly turned off. When we tried to turn it back on got an error: Call for Service Note the following and call for service Code 3000[HC030K6] After a couple of times it looked like it was turning on correctly but when the PrintHead carriage was going to park it self it...

Trying to print clear on a metal and foam but the clear seams to be banding. Nozzle check is fine. I tried multiple ways of printing clear but I can't get a smooth clear finish. I would appreciate any suggestions. Thanks in advance!

We currently use 3m LX 480 for our concrete or textured wall wraps. We are looking for a less expensive material for Indoor smooth concrete wraps?