• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. 19 foot american flag boat wrap went wrong

    Thank you all for the valuable responses. Placing the boat on and off the trailer is another issue i didn't think about. I wanted to get more feedback and make sure the orajet 3951 boat wrap vinyl is great like the orajet 3951GRA . So far no complaints so it can't be an inferior vinyl as...
  2. 19 foot american flag boat wrap went wrong

    The customer is the installer, this is a company in Tennessee, the wrap was shipped to them. They put it on i just made it. They said there 3M certified.
  3. 19 foot american flag boat wrap went wrong

    Hi I had an installer buy a 19ft American flag boat wrap for a customer that wanted it. I made this wrap with the orajet 3951 and laminated with the 290g. Printed on a new roland 540vsi. The customer contacted a week ago and says they can't get the bottom part of one side to stay on and they...
  4. boat wrap went wrong

    boat wrap went wrong

  5. Tiny white dots in blue and black parts of the print

    Nope i didn't get that far. But the problem i had with my roland vp is not the same as your problem, your white dots are all over the place and there smaller . Mine where a bit bigger and only on blue / black. Also were using different printers . But i do know it could be the ink just because...
  6. How to return Roland Printer

    Sorry to hear that, i was looking at the new truvis vg/sg and after reading all of the complaints on signs101 i decided to go with a new 540 vsi. its a bit slower then my old vp 300, but its a 7 color setup and no more smelly ink. I can't imagine being without a working printer for a month they...
  7. Tiny white dots in blue and black parts of the print

    wow 6 month later this thread gets some action . I just upgraded to a Roland 540vsi. I did fix the issue thou, it wasn't the media, static or a dust issue. I did notice the test print for blue was not perfect so i did another manual cleaning and then i did a powerfull cleaning and the problem...
  8. Takeup reel for wraps truevis or vsi

    Hi I m about to make printer purchase, either a new versacamm vsi 300 or truevis sg300, i will be testing prints on both printers this week before i decide. I m also thinking of adding a takeup system which is going to cost 2700 CDN extra and i m just wondering if its worth it. I m only...
  9. Tiny white dots in blue and black parts of the print

    Hi i really hope some one came across this issue Recently i started to get white small dots in random areas of the print , but only in the black or blue areas of the print. At first i thought it was the material , but after testing other rolls its very clear now this is printer issue. This is...
  10. Suggestions canvas

    Hi I tried getting good canvas printing using my roland VP 300 6 years ago and it was a complete waste of time, on the 300 version i couldn't raise the head so the thread from the canvas getting lose were an issue. Also i found that everyone around me was selling canvas prints for really cheap...
  11. Roland VP 540 AND VERSAWORKS loosing IP connection and stop printing not connected

    I had that same problem with my vp-300 , i also think it is the Ethernet chip on the board has a bad connection. I also noticed this was always happening in the winter after i read a post about the work area being too cold. My work area is cold . So i been making sure i load up the material in...
  12. Hp315 or Roland vp540

    I been using a Roland vp for 8 years now and its been working great. But with that said this is what do i hate it about it? 1- The fumes 2- having to let prints cure overnight when making wraps. The roland vp is an old printer Roland have made new advances. With the new roland truevis inks...
  13. Preferred decal material?

    I use the orajet 3551 rapid air laminated with the 290 oraguard for side vehicle decals and for wraps i use the orajet 3951 rapid air also laminated with the 290g . I haven't had a complaint yet. That vinyl works great for all vehicles even boats. I heard good things about 3M also, i would say...
  14. Upgrading from VS540i to Truevis VG-54

    Take a look at the roland website, the truvevis 54" vg is on sale now for 17995 USD and the vs-300i is also on sale for 14995 USD. It seams to me there 54" version of the vs would be the same price. I been looking to upgrade my roland vp thats on its last leg. I read a lot and it seams the...
  15. thoughts on non-oem ecosol ink?

    I been using rite media pro-color inks since 2010 with no problems, i did had to adjust the profile on there last updated inks to get a good print match. But other then that no problem. 74.99 cdn is not bad. They sell the pro color inks 2 but i haven't tried those yet. i will have to use oem...
  16. Need to outgas?????

    How about NOW I m still using my Roland VP, for the past 8 years i always let wraps out gas for a day. For me and a lot of others on this forum when its time to upgrade there are few more choices now, you can upgrade to truevis that uses new fast drying truevis inks, i been also told by my...
  17. Hello. Anyone Know The Maximum Time For Laminition Using Roland Truvis Ink And Ecosolmax 2?

    Thank you that was very helpful. As for the Eco sol max inks 2 vsi printers , i m going to take a good look to see if that is worth getting into.
  18. Hello. Anyone Know The Maximum Time For Laminition Using Roland Truvis Ink And Ecosolmax 2?

    Hi I like to add more to this thread, all i make are decals are wraps and i been using a roland vp-300 to print on orajet 3551RA and laminate with oraguard 290g. So far i print wait overnight and laminate the next day. But i been looking at the truevis series and it seems roland has stepped up...
  19. Just stops printing and states Not Connected in VersaWorks

    I had this problem for few years , it comes and goes and every time i did something that made me think i fixed the problem, but it comes back after a while. After reading this thread i realized the printer is too cold. The problems always happens in the winter and my shop area is cold. So far...
  20. shadi75

    grinding more decals

    grinding more decals
Top