Search results

I did exactly the same mod a month ago, you can probably notice in the photo, the second one from the left and it is still good. I'll order the head anyway. Thanks

I have the print head in the shopping cart. Can I also get 2 connector tubes, see photo? Thanks

Let me try the cables first, I placed an order on your website. I will definitely be in touch. Thanks

I would say at least 9 years, I had the head out and run cleaning fluid with a syringe through the manifold, there was a clean curtain from the nozzles.

We did the PF adjustemt several times, no change

Those are actually red, look black in the picture

Streaks are clearly visible in the test, nozzles are flawless. What then?

all reds are firing, puzzling

I have replaced the cap and wiper in the service station, replaced the magenta damper and still get streaks. Attached close ups of prints, what gives

Unplug all power cords to the printer, wait 15 minutes and plug back in.

I have always had a problem with the black missing several jets since the beginning, replaced two service stations and several cap tops. The cap is meant to seal the entire surface of the print head when parked with the lever had down position. I almost have to soak the head daily to clear the...

I would like to know, too. Can you share that information.

I am hoping the firmware update may solve some issues of getting false reading of the ink status, the beeps become very annoying and having to press “cancel” gets tiring sometimes. I get warnings even with OEM cartridges on occasion. I don’t know if it will make the machine run “better”, most...

After my warranty expired I experimented with 3rd party inks and it has been nothing but an uphill challenge to make the cartridges recognizable, some work, some don't and other start beeping when half empty (the supplier had to send me new cards because they had put 220s on 440 cartridges! When...

I amt trying to update the firmware on my 1614. Downloaded the MSA utility and latest firmware V2.0. When putting the printer in firmware load mode and "waiting for command" displays on the panel I click on download parameters, there is some action and then I get "communication error"...

I have Flexy SE Mutoh edition Version 5 with dongle. $250 it is yours