Search results

Not sure if you figured this out but there is a sensor on the back of the head that may have fallen off.

Same problem here with the E64s, in Canada and the exclusive distributor hasn’t been able (not interested in ) supply ink since this time last year. Now the head dies after only 8000 feet of printing in three years. Suspect damper in the head but no info on it. Will print magenta but not...

Believe this one - a component that is in a date rape drug.

I was told that in january when oki signed over distribution to mimaki, mimaki only wanted the ink not the parts rights. Don't know if true but was told that it was held up because there is some component of an illegal drug in it ( its in all eco-solvent ink) and mimaki didn't get the proper...

Way to go Oki even though you signed an agreement in Canada to Mimaki to supply inks You both managed to totally mismanage it to the point of incomptence there is no ink in Canada for the m5 series of inks. With no idea from distributor when there will be.

Thanks for the insight - I did use Bordeaux with a roland pro iii and never had any issues with it. Color stayed the same, no head issues.

Anyone found or using 3rd party inks for OKI e64s printer?

Try sucking ink from the hose coming from the cap top. You could also put a soaked blue rag on top of the cap and park the head. Let soak for about an hour. Then do a couple of normal cleans. Also make sure your wipers are good. Worked just about every time.

Have tried a dozen different files and it cuts them all off. Onyx has never heard of the problem of course :)

Hi When sending contour cut to cut server from rip the cut server enlarges the decal and crops it. Worked fine last time cut was used. Nothing has changed that I am aware of. Should be 3 decals 8.7 x 15 each across 54" vinyl. Any help would be appreciated.

The 150 can occur if you don’t have enough air pressure.

Used the printer for 12 years and could never get the take up to work without spending alot of time on it. Would just leave it loose and manually hit the switch and roll it tight. Always had to unroll almost to the floor on the back, this happened when the vinyl was coming tight off the roll...

Roast Have had their cloud version for over three months, until I had it they were easy to contact now with crashes when saving, all open files close, they are non responsive either by email or phone messages. Find it hard to believe they are busy helping customers. Don't respond to anything...

Profiles Worth a try that would be great. It will take v2 and v3 of the profiles that may work.

Hi Looking for profiles for the jf 1631 using rasterlink pro ii. Wondering if anyone can help. Thanks

Nesting I have found when using the Mutoh version that all the files needed to have the same profiles with the same options selected before you nested or i would have the same problem.

Try before messing with cables. Pull the line from the pump and see if you can pull ink through the whole system. if you get ink, do a test print and open cover when it goes over material first time, then put some cleaning solution to the cap top close the cover and do a normal clean. if you...

simple first First pull the front cover off, then the chrome cover then the grey plastic cover on the print head carriage. Check the ink line and make sure there is ink going to the head. No, pull black cover off under carriage and use a syringe and disconnect the cap hose from the pump. See if...

remove blue cover than remove the chrome cover over the print head (4 screws). See if your yellow is getting to the damper. Pull the grey cover below the head and remove the cap hose coming from the yellow that is attached to the pump and attach a seringe and see if you can pull yellow through...

This happened to an older couple in Toronto area a couple of months ago. Paid $2,000 for a life time of pictures and the scums never returned the files just took the money.