Search results

have you replaced the capping station with genuine OEM parts, as being on the outermost side this is the one that will require a 100% good seal and inferior copy parts sometimes just dont cut the mustard

what printer are you using?

definately half a dozen tiny drops of oil on the teeth of the belt either side of the head at regular intervals has fixed my problem, clean the teeth of the belt with a paint brush as mine had dark dirt spots that coinsided with the noise as it reached the gear wheel at the end

Agree with above comment, give it a wiggle or 2, it will come free, seems to be an issue which would benefit from a fix.

Dr Decal and Mr Hyde Australia is where I get mine

From what I have been reading a bad valve in the damper will cause the ink line to loose pressure and flow back into the cartridge, so I think this may be the issue here?

service application software for the BN-20 I have the service manual but are wanting the software to perform checks etc on the machine Can anyone help?

Would say around 6 + years old, will investigate pump further thank you

My white ink is draining backwards down the lines, I have replaced captop with OEM part, drew ink to the head immediately but overnight the ink line was empty, replaced with a new OEM white cartridge, and again ink went straight to the head, but once again overnight was empty, I assume it's...

Inkscape is not my go to software but comes in handy (nomally use adobe illustator) I have been given a file from a cutomer who kept fonts as fonts and of course I dont have some of them (normally not too much of a problem) But this is new to me as they are listed as Arial Black, Arial...

I use inkscape for barcode and QR code, then save as eps and import into illustrator

Check your shore hardness of the rollers, or if looking to buy one ask the manufacturer, you want it around 80 shore or more (very hard) mine like alot is a chinese version and unfortunatley is only 40 shore and is too soft for good results ,even with a hard sheet underneath, was going to chuck...

Dr Decal and Mr Hyde in Australia, 500mm wide by 30 mtrs plus now a wider roll size, eco solvent printable, dont know if this helps you, I use it all the time for my bn-20

looks to me as they never cleaned/prepped the surface properly, look at all the crap/dust etc on the adheasive side of the curled sticker

I do ALOT of waterslide using eco solvent ink, Roland BN-20 I get my media from Dr Decal and Mr Hyde in Australia, 500mm wide roll x 30 mtrs, I beleave they now offer wider

I have but are in New Zealand

it sounds like you are printing the swatch library form a file? this is probably where its going wrong as you are able to change profiles etc. you need to print the swatch out of versaworks (it is built in) and is not able to be edited, open versa works and go to media-colour chart 1, and select...

what material are you printing on as your nozzle check looks perfect and you shouldnt be getting such a rubbish swatch print out

Dr Decal and Mr Hyde in Australia, I buy it in 50 mtr rolls for roland eco sol max

and it the captop is not clipped into its proper position, it is sitting too high