Search results

Where is the best source for a Carriage Belt for my FC5100 cutter.

Hello all,I have a Valuejet 1204 and here is the problem. I turned the printer on -everything starts fine. Then the printhead stops midway on the carriage. I shut the machine off and try to start it again and it would not power on. I have replace The mainboard, Panel Unit and power supply still...

You can try www.identifont.com to find a match.

Make sure the carriage is in the station with the lever down, use a syringe with a small tube attached to the tip of it - attach the tube to the line for the black ink that goes into the waste bottle- pull back on the syringe handle to withdraw the ink- do not release handle -keep the vaccum...

I finally go my printer up and running after thoroughly going through the service manual and changing the printheads, cables, fuses and capping station. For about 1 year I was printing on the color head only- I disconnected the fuse for the black head because when I connected it I was getting...

I have this problem with my graphtec sometimes. Just trace over the registration with a black pen or put a piece over paper over the area where the laser is reading the marks if its a glossy media. Also make sure the cutter parameters is set to its maximum.

I just finished replacing my maintenance station and black printhead on my Mutoh Falcon Jr.- It was quite easy replacing the parts but I was worried about setting the voltage for the black printhead- it is actually called Black head rank. You have to enter the hidden maintenance menu. Press and...

I checked the dampers- the colors all full but the black has no ink in it. I also checked the fuses and they have continuity, so they seem to be ok.

I am in the Caribbean region, so I have do my own service. I clean all the line did several washes and power cleaned. I sent a photo to Mutoh customer care, the black printhead is not firing. I now have the CMY printhead firing, so I am printing without the black for now. Does anyone have a pdf...

I check the capping station- all the hoses were clogged. I have cleared most of the lines with cleaning solution. I will order the pump but i will try it again when I have fully cleaned the capping station and lines.

I have a Mutoh Falcon Jr. - I recently switched to ultra inks, the printer was working fine but it is now giving problems. When I send a print to the printer it starts printing then it lays down a heavy puddles of dark ink. When I do a nozzle check the black printhead is printing a dark...

10 years of Autocad - College. Self taught Photoshop and Illustrator.