• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Grainy reds

    Have you tried Roland PR42K and PR43K reds? That's what I use and they come out beautiful.
  2. Inkjet printable Heat transfer vinyl

    For darks go with Eco-Print and for lights/whites go with Solutions Clear both from Imprintables.
  3. Roland SP540V cutter blade, suggestions?

    I use the same blade for everything and I use nothing but a 60 degree Clean Cut Blade.
  4. Roland BN-20 Thoughts?

    Try doing whites/lights with Imprintable's Solutions Clear then get back to me on how it feels.
  5. Roland BN-20 Thoughts?

    All you have to do is tape a piece of vinyl to the laminated piece and run it back through.
  6. Hauling a 540i 330 miles?

    Also if you take it off the stand, don't forget to unscrew the waste bottle and wrap the drip lines with paper towels or something. Congrats on the printer by the way.
  7. Versacamm transfer printing..

    Eco-Print for darks and Solutions Clear for whites/lights both from Imprintables.com Those are the best on the market that I've found.
  8. HELP!!! VersaCamm VP-540i

    I just thought I read it here somewhere. I use Win7 Ultimate and it works perfect with mine too.
  9. HELP!!! VersaCamm VP-540i

    I thought I read somewhere on here that Versaworks doesn't work properly with Win7 home premium.
  10. Roland Vesacamm T-Shirt Printing

    Imprintable's Solutions Clear is the best for white/lights and their Eco-Print is the best dark garment material I have found and trust me I've tried a lot of different ones.
  11. VersaSTUDIO BN-20

    Also it only prints at 10 Sq Ft/hr is what I was told, and also no heater control it's pre-set at I believe 95 degrees.
  12. Big decision

    wwpro he may have sold it. I seen a few people asking if he still had it that seemed very interested. I can tell you from owning both a CJ-500 and a VP-540, there's no comparison. VP-540 prints a 4'x4' banner in 11 minutes, CJ-500 about 1.5 hrs. and the VP-540 on fastest setting still...
  13. VersaSTUDIO BN-20

    hhhmmmmmm now that's very interesting. BTW, PM sent and thanks.
  14. VersaSTUDIO BN-20

    Steve sent me some samples to press and try, but I haven't had a chance to press them yet. I've tried almost everything under the sun, Speciality Materials, Joto's, Siser's, Roland's and I liked Roland's the best but they must of changed something because it got a lot thicker. I'd like to...
  15. VersaSTUDIO BN-20

    The problem with that is, there's no good apparel printable vinyl for darks. You guys do have an excellent product for whites/lights though.
  16. Contour cutting VP-540 prints with a Graphtech Plotter/Cutter

    I haven't ever needed to do it, but how/where do you include Cutting Masters crop marks instead of Roland's? In Versa Works, Flexisign, Illy? Like I said, I've never needed to do this but I'd be interested as I've got a VP-540 and a Graphtec 24" cutter.
  17. New Roland VersaStudio BN-20

    Unless there's some kind of revolutionary printable, heatpress garment product coming out that I don't know of, I don't get it either.
  18. Static on Roland Printer?

    I had a CJ-500 and now have a VP-540 and I've never had static issues with them.
  19. Mixing Vinyl brands on t-shirts

    You can mix and match those brands together with no problems. Set your temp at 325 and press.
  20. Problem solved but who want's to play tech

    I had almost the same problem as you discribed and mine was either the damper or O-ring as I replaced them both at the same time and mine problem went away. It was also on a CJ-500. So for less than $10.00 my problem was solved, but since I posted this I'm sure I jinxed it and will have a...
Top