Search results

Hey, Did you perform the print adjustment and PF adjustment? What temp and resolution are you using?

Check out this video. http://www.youtube.com/watch?v=d_Poe0fLC-I&feature=plcp&context=C35bbec0UDOEgsToPDskK6d5Fs3e51QwdvVGT_G2Pp

What version of RLP are you using? RLP5 has a colour chart creation tool. It is really powerful and can be used to create swatches to be use in Illustrator.

I see some people have suggested changing the dither pattern, or even re-profile. The v3 profiles in RLP have only one dither pattern so changing is not an option. When profiling for RLP you can't change the dot size, only the point at which the different dot sizes initiate, so that what help...

Going into 8 pass is slowing the printer down and therefore allowing more time for the ink dots to dry (dot gain) before the next pass of ink gets laid down. Quite often magenta can be seen through the other inks in a horizontal scratchy appearance. When view from a distance the image has a...

Flexi is great, however not all ink and machine combinations are supported. We write all of our own profiles. I suggest buying an i1. There are inexpensive and can be used directly in Flexi.

How many passes are you doing? How big is the banding? Have you done a print adjust? (aligning bi-direction print) It looks like your bi-directional could be out. What is the print resolution and what dither type are you using?

If you run approved cartridges, the tongue will stick out from the cartridge and trip the ink level switch causing the machine to display 'low ink' then a little later 'ink end' and you will no longer be able to print. If you are using a third party delivery system, there may not be an 'ink low'...

When you start messing around with the settings in the # menus you can really screw things up. These menus are created for technicians or for people who understand the machine intimately. In the end it is to protect the end user. I recommend contacting you distributor. They may assist you over...

Doing a pump tube wash will indicate whether or not the pump is working sufficiently. Watch the cleaning solution: if it helds well before the pump activates then you know the pump is sealing correctly. You may however have a vacuum in your magenta line causing the cyan to be pulled back up...