• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. SP540V print head

    Does anyone have an old non-working print head they want to part with ? I will explain later.
  2. Eleven Ten Ink Conversion

    I use them and like them. Conversion is three cleaning cycles to purge the ink and thats it. You are correct on the warranty process. That being said I would wait for your OEM warranty to expire. I have a Roland and they don't want to talk to you after the switch. The only real problem I have...
  3. need 6mm coroplast supplier

    www.grimco.com. they have a location in southern california
  4. vinyl squeegees

    check ebay . i bought some there
  5. Ink cartridge recycling

    Does anyone know where I can recycle used 440cc ink cartridges. Is there anyone taking them to reuse, I really don't want o trash them, I have close to 20 of them.
  6. Will a ethernet hub work?

    I would recommend getting a switch instead of the router because of the communication issues that may occur. In the mean time unplug the router from the tower and plug in the cable that came w/ the printer. For now that may be a pain. The switch I use was less that $50 and you will be able to...
  7. Will a ethernet hub work?

    If you cant find one you can make one. I made mine. The plugs are available at Radio Shack as a kit and diagrams are available online for the wire configuration.
  8. Will a ethernet hub work?

    good one....it does use a cross-over, not your regular ethernet cable you would use for internet
  9. Will a ethernet hub work?

    I use a Linksys 10/100 5 port Workgroup Switch for my Roland and internet connection with no issues
  10. Hello From Florida

    Welcome. I'm close by in Ocala if you need any help.
  11. summasign t1010 plus cutting wierd

    Not sure if it will help but have you tried unplugging the cutter from the power and let it set for a minute? Maybe that will reset the defaults in the cutter. Just a thought
  12. 3M Protective Film

    I use VentureShield, much easier than 3M to apply. To me 3M is like trying to wrap a basketball with cardboard. If you need help let me know.
  13. istockphoto hint

    Ditto. I have done the same thing. Every penny helps
  14. Hello from the uK

    :Welcome:
  15. Apply Reflective over this??..Suggestions

    i never think installing vinyl ontop of old vinyl is a good idea...just me. i have heated reflective a bit to make it bend but be careful. i would treat it like the vents aren't there, come back and slit the vinyl and tuck with a LITTLE heat
  16. Need Roland SP300V Head ASAP

    try www.rolandmedia.com. havent checked pricing but its a start
  17. Pricing for a friend

    we help each other out. i have a larger machine. and we help each other on larger jobs with labor. we just want to be fair and charge a fair price for our efforts
  18. Prints scratching off

    There you go....there always two ways to.....
  19. SP300, Plugs and cleaning?

    sorry i'm going off the 540 which i have. the 300 may be different
  20. SP300, Plugs and cleaning?

    Find it local if possible. When it comes time for service, and you will need it, you dont want the tech coming from across the country...if you use a Roland tech that is
Top