Search results

Thanks, Very useful information.

I checked the Mutoh Falcon Outdoor pdf brochure but it does not say how many colors it has. I have a Mutoh Falcon Outdoor Jr. 4 color printer and ever so often, I have trouble with one color streaking. I want to get a 48" or 62" model so I have been monitoring Ebay. They always seem to be 6...

My question is similar, so I will post it here. I have a Mutoh Falcon Outdoor Jr. 4 color printer and ever so often, I have trouble with one color streaking. I want to get a 48" or 62" model so I have been monitoring Ebay. They always seem to be 6 colors though, and I don't want to have 6...

This happened to me recently where my black and then color was not printing at all and it was the fuses on the main board. There is one for black and one for color. If you have new fuses you can put them in. Bridging them might work but you risk damaging more components on your main board.

I have a Falcon Outdoor Junior and I was having problems with getting all the nozzles to fire properly even with many head cleanings. I then connected a syringe to the tube that goes into the waste bottle and pulled the ink through. I then left it for about 10 seconds so that the pressure in...

Not a silly question, but yes I did check. My color fuse went as well. When I bridged the color fuse, the color came back. when I bridged the black, the machine shorted off. The short was in those transistors, but there seems to be another problem on the board. I will have to get a new...

I am located in Grenada in the Caribbean but I have a US address through my freight forwarder in Miami.

Thanks for all your responses. I took the transistors that control the color side of the printer and put it over to the side that controls the black because the color was working. The machine no longer shorts of with the bad transistors connected, but there is still no black ink flowing from...

Thanks for the links. I have many old circuit boards with transistors on them. The transistors I need seem to be rated at 60V/ 5A, one is NPN and one is PNP for high speed switching applications. My question is could I use any transistor that has the same or higher rating as a substitute? I...

I believe I blew the transistor by flooding the print head. I have new print heads now. I just need to find those transistors or a new board.

Thanks for your quick response. This link is for a power supply but I am looking for a main board. Thanks anyway.

Hello all, I desparately need Transistors for my Mutoh Falcon Jr. Main Board. The numbers on them are (A1469 R 5D4) and (c3746 R 1C2). Does anyone have an old board that I could buy or can advise what substitute transistor I could use? If we know the voltage and the power, we might be able...

Does anyone know how to clear the NVRAM on the Encad 850. I can't find it in my manual. Thanks.