Search results

Has anyone tried the new Larger Canvas Feature and tried to make Finecut Crop Marks. I work with large vehicle graphics so the larger canvas is great and I don't have to scale my graphics. I did a few test and Rasterlink handles the files just fine but noticing Finecut does weird things when I...

None of my search tricks work. I think because its too small. :( Think I found it but then the "c" is to curved and i wish I knew the proper name but the thing on top of the "g". thanks

Here are my results of a test draw on my JV33-130 The bottom shows what it look like before a nozzle wash the top after. First I know there is one drop out marked with a green rectangle also ignore some of the other blemishes which are from I guess dirty rollers parked on the material. Also...

I'm usually good with this but not finding what I need. Tried What the font and Identifont. Note this pic is a tad skewed. I keep going to Futura because of the numbers but the letters are all wrong. thanks

wrong section

First I did not create the vinyl for this project. Someone I occasionally print stuff for is out of town installing some wall vinyl and has a problem. Its Mojave SPMWG6 http://www.mojavedigitalmedia.com/digital-media/mojave1/wall-graphics/wall-graphics/item/179-spmwg6 The vinyl must have been...

I really have to move Rasterlink off a 12 year old XP computer. I just rebuild a nice I5 windows 7 with 8 gigs of memory. I've installed Rasterlink and now trying to add my printer to it thru Printer Management. I downloaded the latest driver installed it and it found the printer and I see it...

I need to make 6 36" x 72" I had a good source for roll up banner stands but can't find it. They need to be fairly substantial. I have the right material just can't find my stand source. thanks cliff

They are calling it a banner so I can only assume that its two weighted stands with poles and the banner is stretched between them. thanks

Needing to make some small backlit signs for vehicles for our fleet. I made some with EL panels like this but looking for a cheaper simpler way. https://www.sparkfun.com/products/10801 I had to buy the panel, a 12 volt inverter, a 12v volt plug, solder them all together, stick a decal over it...

I've been asked to print a double sided decal. You know so when its stuck to glass you can read it from both sides. On my Roland I came up with a setup where I printed it on clear reversed, applied white 651, applied ink jet material 3551 or something similar, printed again right side up,then...

Tried a search but not sure what to search for. We need to apply application tape to vinyl upto 48" and maybe upto 54". Its 3m 680 reflective that doesn't like to have application tape stick to the backing. Heck the vinyl doesn't like to stick the backing.:) I got a tip from here to use 3m...

Now that i have seen how to properly use one i would l like to tweak my laminator

Ok no that I have some ideas for taping I've now got to ship these decals. I can ship most flat in box but I have one decal thats 28 by 65 and kind of triangular in shape. Its 3M 680 CR reflective. If you have never worked with it its a major pain. The vinyl is super thick and barely wants to...

We are going to need tape and ship decals that are around 5 feet long and are cut from 48" 3M 680 reflective vinyl. We just moved to an area thats letting us build and use tables bigger than 30" by 6 feet. We have a 4' by 8' and a 4' by 12'. I've attached a pic of my setup. Any tips? Maybe a...

I need to make a big banner. I this is an inside job not something I have to sell. I first told the people designing it to have it printed in one piece by a banner company they use all the time but not enough time. I've never done a seamed banner and wondering should I seam it as two pieces...

OK as the title says just did my first box trailer (8'x21') and have one nagging question. How do you line up the prints from sheet to sheet? First though you need to see what I was dealing with. Every 8 inches or so a horizontal rib. If we just started at the top, as we went over each of...

I have a New Mimaki JV33-130 and a CG-130FX II. Also we have an old Roland SP-300 . We are used to using Versaworks for everything with design done in Adobe Illustrator CS5. By design I mean mostly adding cut lines or other tweaks to graphics provided by others. With the Mimaki machines we are...

Does anyone know of any good solvent printable vinyls (mimaki jv33-130) for decals for the inside of doors. They want to stick a small 2" square decal on the interior door panel. I'm telling them not sure how long it will last since the vinyl itself is not a great surface but any type of armor...

I have a major laminator issue. If you check my history I came here 3 years ago asking for tips about my Royal Sovereign RCH-1401 H. Its been going ok but I still get alignment issues where after 10 feet I'm an inch or more to one side but this new issue is a show stopper. Since I only had a...