I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Remember having your cut in one layer and your print data in one... And if you dont have it alredy then install Finecut 8... CJV30 and Print & cut can get som horrible misscuts with Finecut 7 sometimes
Lets say you do your artwork in Corel, When you have finished you Push the RL button in the finecut menu , Here you get a "output meny" Choose your Hotfolder (Usually C:/rstrl.../hot/"name of printer"
Then choose what layer to print and what to cut on the bottom of the "menu" , Then push...
Yes the "metallic part" has to go as step 1, look closer so you can see how it is mounted !
Do a quick search so that you find answers about "priming / pre fill" the dampers with a syringe, BUT remember to open the valves before you start pulling out ink with a syringe from the damper ! NEVER...
You can NOT change the SENSOR OFC to get it to cut better ! Under Setup--> MARK DETECT (Using finecut 1pt) you have X & Y OFFSET , here you can change the cutline ... if its differ in X direction try changing the X value and check if it got better or worse
print out a lot of squares with reg...
Du you have the knife at its right position for half cutting? Dont you have 2 positions for the knife ? One is for standard cutting and the one towards you is for Half cutting
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.