Search results

After doing the bi directional alignment using the detailed setting, all 8 strip tests, my test print looks great but my actual print still has the misalignment. A thin band on the left side of each letter in all colors, not sure what else to try.

I have been experiencing all sorts of issues with my 1204, now I am getting this EO74 message and it will not run. Not sure what to try next.

I started getting some color streaks in my red and yellow. I did some cleaning cycles and a little charge with no help.have had this before after a head soak, some time ago. I ran some pure yellow and red stripes through it has cleared mostly up but it seems worse in the morning when I first...

My menu skips functions now, no more 17 INK STATUS and others missing, it goes from 16 to 18. I was able to get it to find it by hitting some other options but I cannot get it to show after hitting ENTER. I shutdowned the machine a few times with no luck. Is there a download for the 1204 to...

I went to turn of my printer and I am nothing is happening. My son said a paper was jammed around the roll. Is there a reset or a fuse, and where exactly is it located? The ac power source is fine.

I have a eco solvent Mutoh and am thinking about getting an HP Latex printer. Seiko is saying the life of their solvent ink holding up to UV is 10x longer with yellow than using the HP Latex, is that true? They also say the HP Latex printers are only for short term outdoors....??? My salesman...

I'm getting a faint ink bleed, a milky cloudy look, very light blue in the white areas some blotchy, printing red seems to be OK, no bleed. I did a cleaning, and tried different media. Valuejet 1204. An approved Endura ink cartridge from Sign Warhouse.

I thought my head was clogged, did some head soaks, no success, then took the top off and noticed an air gap in the line back near to the cartrige, put in another cartrige C in, did more cleanings but no movement. Tech support must be on vacation but I thought there may be a setting to pull the...

I have used One Shot gold metallic but it looks dull. I want something shiny like gold leaf. Two other companies in my area dimentional foam signs have a very long lasting and bright and shiny gold paint on their lettering. Can anyone recommend where to get this gold? It is not gold leaf. Thanks.

Does cast print vinyl, white, last as long not laminated as cast cut vinyl? I have assumed when out of the one, just use the other for cutting only. I was concerned the printed type may have less UV protection for it to accept ink better. I have in the past used the printed types when needed.

When I try to print, (from Corral X5 to Flexi 10 using a Mutoh 1204) a gradiation I get steps. I have set my Flexi to "SUPER" yet still the steps show up. Is there a setting in coral for higher res? I am exporting from coral to Flexi with an EPS file.

I just pulled out my Mutoh Outdoor Jr and replaced it with a 1204 Value Jet (SW) printer. I am usingFlexi 8.1. I am having a hard time getting ICC profiles. I have a few Orical ones. The 3M180c has no listed profile for Flexi. after checking out their site. Is there one that works out there? I...

I was told by a 3M Rep that I need to use the exact profile or I could over saturate the film and loose adhesion. I went online but could not find a profile for the 180c using Flexi 8.1. 3m does not have a flexi profile for the mutoh outdoor jr. Is there one that works well? Have any of you...

What is a good starting point for the heaters? I am getting banding and my red letters are fuzzy. I bought this unit used and I do not think the previous owner ever got the settings right. I've had the unit a while now and I cannot depend upon it printing the same from one day to the next.

A few years ago I questioned Laminators about mounting alumilite and luster board into slots made in the new treated lumber made with copper sulfate. They said no problem only to find out several signs had eroded severely. Since then I edge trim all my blanks that will be touching treated lumber...