I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
you use them while printing too? you don't get the roller marks in your print? or do you just put them in when you cut? You also use the small feet on the ends?
Ill have to try this tomorrow and see if it helps
right now i am using general formulations base and laminate but the same thing happened while using substance base and lam and was actually a little worse due to substance being thicker. I have my heat setting close to all the way up, i believe it is at 112 print and 114 dryer. It is just weird...
in the beginning I did, but it seems to cut better with the heaters on, making the material softer. But I will try again with them off. I will try anything at this point.
so after a few days, i have tried different cutting settings and blade depths. I reduced my blade depth and reduced my force down to 150 starting point. I loaded some media and a filing with multiple different shapes. then tried cutting it changing the settings each time. after the first cut...
No I remove the roll of material when I go to cut. I am already double cutting but maybe if I reduce the pressure it will help. Like I said I'm going through the backing paper in some areas but not through the laminate in others. The "waves" in the material are right in front of the blade and...
I do notice that the print is almost lifting off the bed almost like waves in the material close to the blade because of the pressure I'm assuming. The lares print that I did today was not long enough to reach the ground in front or back and still had the cutting issues.
I am having an issue with cutting thicker materials on my vp540. I previously had a sp300 and never had an issue but now with this machine I can't seem to get it to work. I am cutting dirt bike graphics on 4mil base and 12 mil lam. I have it set to double cut, have a new 60 degree blade and...
Yeah noticed that as well, the power height adjustment is from a higher end model of theirs not sure why they showed that on the zoomed in shot but that's what it is.
Also I agree that there is no feedback which has me a little leery but it seems likes decent product and the price is great...
LightningLam Lite
Dont mean to take over your post but Ive been looking for a new laminator for months now, and have been contemplating the USTECH laminators that you are looking at, also looking at GFP. But today I came across these new laminators on USCUTTER and they seem awesome for the...
I am designing some graphics for a kawasaki dirt bike and have my lost my color code for kawasaki green. Any help would be greatly appreciated, I am looking for the newer green color in either pms or cmyk. Thanks in advance.
Thank you for all the useful information, I am new to the game and have been buying the convex highbond as well as the pro-shield 12mil. with good results but like I've seen I am not getting the ultra pop from the laminate like others have stated. Also now I am trying to find a vinyl to use for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.