• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Printing Lime Green

    Agreed - 50Cyan 100 Yellow probably your best bet.

  3. Illustrator to Versaworks-CutContour Not Working!

    Look up on youtube, the video will clear up any questions.

  4. Etched/frosted Glass Vinyl?

    Oracal and MacTac both have a decent version of the frosted (etched) vinyl
  5.

    Help with a font ID please

    try whathefont.com

  6. Black is printing green

    straight black will tend to not print as a good deep black, you will need a supported black. Try a 30c,30m,20y,100 blk or some variation of this to ensure you get a deep rich black.

  7. Cutting from Mac.

    what rip are you using? setting up files is sometimes tricky(specific). Look up on you tube for instructions. good luck!
  8.

    Roland SC 540 print alignment

    Ok so the encoder strip was dirty and we cleaned it with alcohol. now the printing is way off. prints sideways? like drifting image? any suggestions.

  9. No Black,No Magenta

    head issues I've tried several head cleans and even soaking magenta head. any suggestions?
  10.

    xc540 frustrating!

    looks like heads need some serious flushing. I am puzzled on your print out (pics) SC540 Pro II Ex? mine does print test as K,C,M,Y,LC,LM?

  11. Roland cj-540 or SC-545 EX Service manual

    any chance one of you guys can send me the service manual for sc540 Much appreciated! vince@colortransfer.net

  12. Roland XC-540 Cutter Not Reading Registration

    When you do a manual head clean, use a swab with alcohol to clean off the eye. Seemed to work. Over time/use the over spray seems to collect on the eye.

  13. "New" Encad Novajet pro 600e user

    Rip I have an older 700 encad I used Photo Print RIP for this on my Mac I'm sure I have the software as well as parts if needed. You are welcome to contact me if you need more info. Victor 801.972.2834

  14. Uh Oh! SP 300v Not Printing Blue?

    Maybe try a new capping station?
  15.

    SC-540 Print Issues

    In ColorRip, in Setup, Edit Properties, Click on Media Options. See Calibration Adjust this and try a test print Be sure to note where you move this so you can go back if needed. Good luck
  16.

    SC-540 Print Issues

    Looks like it could be your feed calibration. It is in the RIP. Are you using Versa works or colorrip?
  17.

    Halo- ing

    its really does not appear as banding, it's just that 1st 4-5 inches as the print head starts to move across. Vacuum power? or maybe heat?
  18.

    Halo- ing

    Does anybody have a suggestion on fixing this. Its not a scuff but it does this mostly on heavy solid colors the first 4-5 inches of the print? Roland SC-540 Thanks Victor
  19.

    Magenta problem!

    Ink Drops I have a Roland Sc 540 ES Pro II. I am having some issues with the Black ink occasionally dropping ink onto the the material while printing. Anybody have these issues? Ideas on how to correct?
Top