Search results

It's not the USB cable, but feel free to replace as it would be your cheapest fix. A USB cable does not split the feed of infomation into individual colors channels like a component video feed. This sounds like you are having electrical issues with the Yellow Print heads. If you installed a...

Safety First - No mechanical fasteners on an overhead sign is Crimina. Stick to your guns, if they will not allow fasteners of some type let them install it.

Welcome from down the street in Lakeland Try John at Seal/Neschen, he can hook you up. j.manuel@neschenamericas.com

You Did everything right, except you didn't wait for either Paint to gas. Been there way too many times. You should have waited a min. of 24 hrs before topcoating with the clear and a min. of 48 before applying the foil. If your shop humidity is high give both an extra day or get the sign...

Your only reasonable option is to print with a flat bed UV printer, some R&D will be needed to handle the 2nd side. If you want to add longevity just clear coat after they are painted with Matthews.

insignia, think you are right. yes we have good ink flow. Tech support put call in with Mimaki. I'll let you guys know what the out come of this is. I appreciate everyone's ideas.

Yes, Ink in dampers and yes I can pull ink through. New to the posting so I apologize for double posts if they show up. We also turned off printer with main switch and unpluged it from the wall for 20 mins. Still nothing. Tech thinks it might be the brains. They are to call me back.

Yes ink flow is good.

The 20 min turn off didn't work. waiting for call back from tech support. Yes ink in dampers. Going to make sure can get ink through with syringe. Thanks for the ideas. am willing to try anything at this point. Tech support is leaning towards something with the strip board.

99min soak and strong clean Well, I guess we are down for alittle while. 99 soak and strong clean did not work. Now we are trying unpluging it from the wall and turn off main switch for 20mins.

Good Morning all, JV3-160SP is the printer. We use RasterLink for our RIP. My issue this morning. I am getting no colors. Did a test print - does the act of printing but no ink on the vinyl. Did 15min nozzle soak... nothing - clean capping station, disway, cleaned around heads, did two strong...