• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Roland LEJ-640 VersaUV LEJ Hybrid UV-LED Flatbed Inkjet Printer

    can it run rolls of polycarbonate sheets with white? not the twinwall type of polycarbonate but sheets only.. can this or the LEC cut and crease the polycarb material, it's hard but it's thin, probably around .20 - .50mm thick, thanks in advance, I'm pretty much looking for a printer which can...
  2. Ink?

    I can't seem to find information about ink durability in terms of months, can someone inform me about the durability of inks which compares true solvent, mild solvent, latex, UV Curable, and dye based inks? thanks so much.. This is for example using sticker as media, on vehicle wraps exposed in...
  3. Jv33-160 nozzle clog question

    we have the same clogging problem, and mind you, our printer supplier is asking us to buy another head, this is after replacing the head in warranty, like we already clogged the heads 4 times in 9 months! and this time they wont change it under warranty, my suspect is their mimaki inks.. now I...
  4. Hologram Printing

    something silimar to this http://i1122.photobucket.com/albums/l532/rexdflex/hologramiCON.jpg
  5. Luma brite

    They us EL sheets, but do you use translucent stickers just to get the light through the vinyl sticker out?
  6. Hologram Printing

    Hi, can anyone help me with hologram printing? I have a project which requires a holographic lettering, probably using hot foil stamping, but I have no idea what machine to use as well as what type of holographic material. The hologram is supposed to be printed on polycarbonate film. Thank you...
  7. Magnetics on Mimaki

    oh ic, which means less ink and better output? it's just slower? thanks
  8. Magnetics on Mimaki

    i've got a question, which is of different topic, do you print in 12 or 24 pass? i find it weird that our supplier tells us the mimaki uses less ink if it was used on 24 pass, but he might be right, so i wana know your opinions. thanks
  9. Magnetics on Mimaki

    behind and in front of the aluminum area, which means the heater part right?, the pre heater and post heater part.
  10. Mimaki JV33 head starving problem with bulk system ....

    have you tried using the cartridge ink pouring it in the bulk system?
  11. Magnetics on Mimaki

    Just a question if it's possible to print magnetics with .5mil thickness on a mimaki jv33. Thanks
  12. Mimaki JV33 head starving problem with bulk system ....

    what do you mean bump up cleaning cycles? cleaning does not do the job, because after cleaning the head still does not print right, but nozzle wash did. Ok, before we directly put the bulk system to the head, it was used to be installed in the cartridges, and drop outs occured, but didnt change...
  13. Mimaki JV33 head starving problem with bulk system ....

    ok this is really frustrating, last week we had the whole printer replaced, with the old bulk system retained, after a few long prints we had another drop outs, the dampers were not starving but rather the head is not dropping any ink, it needs nozzle wash, it already happened twice in two days...
  14. Dealing with Static

    how about removing the static from versa boards? or ensuring that they are static free iin storage?
  15. Mimaki JV33 head starving problem with bulk system ....

    artbot, can I ask how do you clean clogged heads using strings? do you do it going up to the ink supply stream from the damper?
  16. Mimaki JV33 head starving problem with bulk system ....

    yesterday i experienced another problem quite similar, i was printing image in green when suddenly it stopped dropping yellow, so you could guess its already blue when it prints. however when i check the dampers it is still ok, half filled and not empty like before, did try to fill heads twice ...
  17. Mimaki JV33 head starving problem with bulk system ....

    sorry artbot, what do you mean traingle?
  18. What bit to use for stainless steel...

    I think routers aren't used for stainless sheets, it needs plasma cutters to cut stainless materials
  19. Mimaki JV33 head starving problem with bulk system ....

    ArtoBot: Since you mentioned adding butyl carbitol in the ink itself, I have a question, I have been experiencin problems with the black ink, and the tech itself suspects the black ink has a problem, well, meaning their ink itself, every now and then I get clogging heads on the black ink that...
  20. Mimaki JV33 head starving problem with bulk system ....

    i have the same problem before, and it's still a problem now, although specifically in a yellow ink I have the original thread here http://www.signs101.com/forums/showthread.php?p=723489 artbot has and other people has discussed this in detail, hope it helps
Top