Search results

Any guess on the word RENO.

Any help appreciated. I think it is Giovanni but notice some differences. Maybe it has been stretched and distorted? See attached.

It is a fabric awning, will vinyl hold?

Looking for someone who can make a replacement sign for this awning (see attached picture).

I am working on a project converting some single sided signs from flourescent to LEDs. I am thinking of going with some 1.0 Watt super bright LED modules.

I just stripped and reapplied vinyl to a double sided sign close to those dimension and I just did it in place. In retrospect I would have been doing the customer and myself a big favor if I would have converted it to a flex face. When signs are that size it is a lot easier for maintenance and...

I currently do installations, maintenance and repair of electrical signs and do sub work for local sign shops hanging the signs they design and manufacture. My clients often ask me about vinyl window lettering and logos and I have been referring them to shops I do sub work for. I have applied...

The way I have done it is.. Click on " Lists" than "templates" Click on the "templates" drop down menu in lower left corner and choose "new" Choose the type of template you are going to create. At the bottom of the design page choose "layout designer" Here you will be able to customize...

Try ESCO Manufacturing. They sell that type of equipment.

Haven't had the opportunity to use this but might work for your project. See link below. It is self contained so weather shouldn't be an issue. http://www.trinorthlighting.com/Flex%20LED%20Neon%20Lights.htm

Figured it out for anyone who cares or runs into this in the future. I drilled out the rivets on the retainer and found that the flex material was screwed into the inner (square tube steel) frame with a lot of screws. No tensioning system. Thanks for your suggestions.

here is a picture. Not the best picture but a picture.

The front has got an aluminium retainer with rivets.

Have you ever seen one like this? Trying to figure out who manufactured it so I can get some direction.

Need help. Anyone experienced with replacing a face with this system? What do I need to do? Picture attached.

Yes, the transformer only runs this letter. I ran new leads back to the transformer. Replaced the transformer with another one that I know is working. I jumped all the tubes one at a time to look for bad glass (did not make a difference). I ran all new GTO connections between the glass. The...

I am stumped, looking for any ideas. When I first looked at the sign there was a bad buzzing noise coming from the sign and the electrodes were firing but not illuminating the glass. The transformer (France1530) light indicated the transformer was working properly and it was a newer...

I am stripping the vinyl off some large sign polycarb faces and I am going to apply new vinyl. Anyone have a technique to either polish the face to match what was under the vinyl or to discolour what was under the vinyl to match the exposed part of the face?

Many years ago I was working for a company giving jeep tours. One day I was taking a husband and wife who were on vacation from Nebraska to a "ghost town" in the middle of nowhere. There were two roads that led to the ghost town. The one we were on and another one from a town 10 miles away...

I am working on a sign that reads "National'. It is white neon(argon and mercury). The letters are all on one transformer. The letters N & a are either very dim or not illuminating, the rest are illuminating. I checked the tubes with a tester and they appear to be good (they blink). Because...