Search results

hi anyone know how to remove the platen on a vj1304?..dropped a roller axle down between the grip roller and back edge of platen. can access the front platen allen bolts after removing the front heater cover, but not the rears?.. am probably going to leave it in there..hopefully doesn't short...

hi anyone got a parts manual /pdf or other type of file for vj1304 or similar? thanks erl

the incredibley annoying thing with this( and many other) forums, is people asking for help with problems, then never coming back and letting everyone else know what the solution(if any) was!!..it drives me mad following a thread for pages only to have the poster dissapear without a...

cAN SOMEONE PLEASE EXPLAIN THE RELATIONSHIP BETWEEN RIP AND PRINT AND PRODUCTION MANAGER IN FLEXI 8.6. SEEMS EVERY TIME I SET THE TEMP AND WAVE PATTERN IN ONE, THE OTHER SETTINGS ARE DIFFERENT, i HAVE TO GO BACK AND FORTH BETWEEN THEM AND I'M NEVER SURE WHICH IS GOING TO ACTUALLY PRINT! USING A...

hi, anyone got a good set of paramiters(pressure, speed, overcut, etc) for cutting material like R Tape tatoo etc.. thx

Hi, has anyone got a good set of paramiters (in summa cutting control) for cutting small lettering using a summa s 140 d with a new 45deg blade. Tried changing a lot of different things, overcut, smoothing concatenation etc.. Still can't get as small as my old graphtec..

Hi, has anyone got a good set of paramiters (in summa cutting control) for cutting small lettering using a summa s 140 d with a new 45deg blade. Tried changing a lot of different things, overcut, smoothing concatenation etc.. Still can't get as small as my old graphtec..

well my friend, i can say with a very large sigh of relieve, it's not urban legend!..worked a treat, pulled plug from wall hit power button 4-5 times ,cried, looked on line in vain for fuse info on web, turned it back on..and all was good!! But if you have a copy of the service manual, you can...

got a severe jam behind the rollers on my vj1304 while printing double sided banner, guess the rollers were trying in vain to pull through, then everything went dead, HOPE it's just a blown fuse, i didn't get any nasty head strikes, anyone know the location and values of the fuses, can't find...

vj1304 blown fuse..got a double sided banner jam the rollers on the mutoh 1304, guess the rollers were trying to pull the material through, but couldn't, power went out, nothing at all now on the panel , hoping it,s a blown fus, anyone no the location and value? thx Erl

thx bud.. vj 1304..what is the menu command for advancing amount of media between consequtive prints..?. less than an inch between prints if i don't manually forward media..thx

hi guy's, when we do a head soak, do we cover the rubber edges of the capping station, or cut the cloth to fit inside ?..re soak every 30 mins or so?.. thx

head soak on vj 1304.... do we cover the rubber edges of the capping station, or cut the cloth to fit inside? thx

should say this for a vj1304 haed soak

when e do a head soak, do we cover the rubber edges of the capping station, or cut the cloth to fit inside/ thx

the bottom roll could be a sacrifice roll that goes through under the print and stops the laminate sticking to the rollers if it is bigger than the print...I'm building a second roll holder onto my duralam 60in as we speak...

Thx bud, Is there a way to get the vj to go back to original origin (like you can do with a plotter)..manual is a bit vague in translation on some areas..!

Hi Guy's, what is the process for overprinting on translucent vinyl (GF224) Using Flexi Photo print 6 and Mutoh vj1304..?Something to do with origin menu?..can't find an overprint option in photoprint..? I can get pretty close just by using ref mark taped to platen, print, then re align media...

Thx for that info, I'm using Flexi 8 which came with the mutoh,..wasn't sure what was happening when the vj starts up....it has initiailze all, media only, except media, so did'nt quite know what settings were being changed. Also the flexi rip knocks out the heater settings when you change the...